Active Member
|
[China]
Contact name:Albert
Shenzhen Greetwin Technology Co.,Limited |
|
|
80dB 27dBm GSM 900MHz Cell Phone Signal Boosters with LCD Display
Model. GW-27G-NH
Why do you need a signal booster ?
Cell Phones have become an indispensable part of modern day lives. From our first breath to our last in the day, we ensure we keep our cell phone close. The cell phone alone is not what fancies us. There’s constant need to stay connected, the fear of “losing out” in life or being “left behind”, better known as nomophobia. Although technology has progressed immensely in helping the signal reception reach our doorstep, that is not always the case - Voices are not always quite clear to be comprehensible, mobile internet becomes sluggish and seems to take forever to load Internet pages or Youtube videos due to weak signal, and the worst is the problem of dropped calls altogether.
Signal Booster Introduction:
Signal Booster GW-27G-NH is designed to enhance and improve the quality of mobile 2G GSM900 connection.There’re black and white colors for options.
The gain of the model is 80dB, the power is 27dBm, which is compatible with all domestic operators of mobile communication. It is ideal for using in houses, offices, shops and restaurants.
The model is equipped with an LCD screen, which indicates the level of input signal before and after boosting. The information on the LCD screen, greatly simplifies the process of adjusting the gain of the system.
Signal Booster Specification:
Frequency Range | Uplink | Downlink | |||
GSM 900MHz | 890 - 915MHz | 935 - 960MHz | |||
Max. Gain | 75dB | 80dB | |||
Max. Output Power | 23dBm | 27dBm | |||
Band width | Wide Band | ||||
Manual Gain Control | 31dB / 1dB Step | ||||
Automatic Gain Control | >31dB | ||||
Ripple in Band | 6dB; | ||||
Noise Figure | ≤ 6dB | ||||
VSWR | ≤ 2.0 | ||||
Intermodulation Products | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
Time Delay | ≤ 1.5 μs | ||||
Frequency stability | ≤ 0.01ppm | ||||
MTBF | > 50000 hours | ||||
Impedance | 50 ohm | ||||
Power Supply | AC 90-264V,DC 9V/5A | ||||
Power LED | Power indicator | ||||
ISO(Alarm LED) | Red | Self oscillation or Strong input signal | |||
Green | Normal | ||||
Mechanical Specification | |||||
RF Connector | N-Female | ||||
Switch | Power Switch | ||||
Cooling | Heatsink Convection cooling | ||||
Humidity | < 90% | ||||
Operating Temperature | -20°C ~ +55°C | ||||
Environment Conditions | IP40 | ||||
Installation Type | Wall Installation | ||||
Size | 228mm×170mm×65mm | ||||
Weight | < 3.5Kg | ||||
Other Frequencies for options:
| Frequency Range | Uplink | Downlink | |||
| EGSM900MHz | 880 - 915MHz | 925 - 960MHz | |||
| CDMA800/GSM850 | 824 - 849MHz | 869 - 894MHz | |||
| AWS1700 | 1710 - 1755MHz | 2110 - 2155MHz | |||
| DCS1800 | 1710 - 1785MHz | 1805 - 1880MHz | |||
| PCS1900 | 1850 - 1910MHz | 1930 - 1990MHz | |||
| WCDMA2100 | 1920 - 1980MHz | 2110 - 2170MHz | |||
| LTE2600 | 2500 - 2570MHz | 2620 - 2690MHz | |||
Signal Booster Features:
1. Coverage up to 5000 m²
2. Manual mode for adjusting the gain by “+” / “-” button
3. Smart mode for adjusting the gain automatically
4. Fluted surface on aluminum shell provides an optimal cooling
5. LCD Screen displays the working status of AGC and ISO, gain and power in time.
6. Support any cellular devices (voice & data & video)
Signal Booster Instructions:
Power LED | Green | Normal |
Off | DC power problem | |
Smart LED | Green | Adjusting the gain automatically |
Off | Manual mode: adjusting the gain by “+” / “-” button | |
LCD Display |
LCD display will show the real-time gain, “+” increase gain, “-” decrease gain.
| |
SEL | 1. Quickly Press: select the different systems when you need, (only for Dual band, Tri band, Quad-band or Five band repeater) 2. Press for 2 Seconds: select the smart mode or manual mode | |
FAQ:
1. After installing booster signal not be very good, indoor signal
coverage very small ?
> Adjust outdoor antenna's location and direction
> Change another high gain outdoor antenna
> Check whether cables are connected well
> Change more powerful repeater
2. Cell phone signal full bar, but communication quality bad ?
> Much closer distance between indoor and outdoor antenna,
separate them with a longer distance.
3. After installing booster not only signal be good, but also more
bad ?
> Much closer distance between indoor and outdoor antenna,
separate them with a longer distance.
4. Working good for long time, suddenly signal bad ?
> Check whether outdoor cable connectors are flooded
> Check whether power light is working normally
> If cables are not flooded and power light is working normally,
the booster should has problems and need to be sent back to factory
for repair.
Signal Booster Application:
Signal Booster Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes on the targeted place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers,
spring washers, and nuts in turn, and tighten the nuts to fasten
the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the
booster to check the operation status.
Signal Booster Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN: connected with Power adaptor.
Our Workshop:
Our Company:
Greetwin Tech is a strong and reliable factory, focusing on the R&D and Manufacturing of Digital ICS Repeater, RF Repeater, Indoor Signal Distribution System, Trunk Amplifier, Band Selective Repeater for more than 10 years.
