Home Companies Changzhou Shinma Drying Engineering Co.,LTD.

25KG/H High Speed Centrifugal Powder Making Machine Lab Spray Dryer

Contact Us

[China]

Trade Verify

Address: No55,wenjing road,jintan district，changzhou city，jiangsu province，China

Contact name:Neo

Changzhou Shinma Drying Engineering Co.,LTD.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

25KG/H High Speed Centrifugal Powder Making Machine Lab Spray Dryer

Country/Region	china
City & Province	changzhou jiangsu

Product Details

LPG-25 High Speed Centrifugal Spray Dryer

LPG size centrifuge atomizer Spray Dryer Features

1. At a high speed of drying, after the spraying of the liquid
material , the surface area of the material will be increased
greatly. In the hot-air flow, 95%-98%of water can be evaporated at
a moment. The time of completing the drying needs only several
seconds.

2. This id especially suitable for drying the heat sensitive
materials. Its final products own the good uniformity mobility,
dissolving capacity. And the final products are high in their
purity and good in their quality.

3. The production procedures are simple and the operation and
control are easy. The liquid with the moisture contents 40-60%(for
special materials. The contents may reach 90%).can e dried into the
powder or particle products once a time. After the drying, there is
no need for smashing and sorting, so as to reduce the operation
procedures in the production and to enhance the product purity. The
product particle diameters, looseness and water contents can be
adjusted through changing the operation condition in a certain
scope. It is very convenient to carry out the control and
management.

PRODUCT SPECIFICATIONS

No	Item	Data
1	moisture evaporation amount	50kg/h
2	operation temputure	input air140~220℃,output air 80-100℃
3	Tower outer diameter / tower net height	3m/7m
4	Atomizer speed	18000r.p.m
5	Atomization type	Centrifugal atomization
6	Heating source	steam/gas+electricity
7	Product collection method	First stage cyclone + second stage+water film dust removal

Main Features:

1. The drying speed is high when the material liquid is atomized, the surface area of the material will increase greatly. In the hot-air flow, 95~98% of water can be evaporated at a moment. The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials.
2. Its final products own the good uniformity, flow ability & solubility. And the final products are high in purity and good in quality.
3. The production procedures are simple and the operation and control are easy. The liquid with moisture contents of 40~60% (for special materials, the contents might be up to 90%) can be dried into the powder or particle products once a time. After the drying process, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition within a certain range.