Chile AD730 Metal Deck Cold Roll Forming Machine Bending Cal 20 Cal 22

Chile AD730 Metal Deck Cold Bending Forming Machine Cal 20, Cal 22

Construction of floor bearing plate equipment. (metal deck roll forming machine/metal deck bending machine)

When the floor layer structure elevation changes inconsistently, take the measure of adding welded steel sections, so that the horizontal structure is a step transition, when lowering the elevation of the I-beam web plus welded angle steel; raise the elevation of the I-beam flange plus welded channel steel. When there is a reserved hole in the floor, the size is generally greater than 500mm x 500mm when using the first open hole measures, that is, in the steel beam with welded steel joist separation, increase the rigidity of the hole, mesh reinforcement in the hole break, and welded with steel; hole size less than 500mm x 500mm when taking after-open hole measures, that is, in the floor bearing plate to increase the plug split plate, mesh reinforcement through, concrete pouring forming The reinforcement can be cut afterwards. (floor decking roll forming machine/ floor decking bending machine)

Floor bearing plate equipment profiles 0.8mm, 1.0mm, 1.2mm wide 688mm ~ 940mm, 51mm ~ 76mm high. engineering floor bearing plate equipment and reinforced concrete structures work together, the composite structure. Floor bearing plate laying and steel beam connection, plate end and steel beam fusion penetration spot welding, the middle using peg and steel beam penetration fusion welding; floor bearing plate between with special clamping clamp bite pressure hole connection; plug with special galvanized plug plate and floor bearing plate equipment and steel beam spot welding. If it is with curved area floor bearing plate shaped cut using plasma cutting machine, its cut smooth, the surface galvanized layer intact. Floor bearing plate equipment welding using manual electric arc spot welding, welding rod for E4303, diameter 3.2mm, melting through the welding point for 16mm. original design welding point spacing 305mm, after the welding point will increase 1 times, in order to ensure that the operator walking floor bearing plate does not deform, concrete pouring floor bearing plate end does not leak slurry. (Steel deck roll forming machine/Steel deck bending machine) (roof deck roll forming machine/ roof deck bending machine)

Flow chart of Chile AD730 Metal Deck Cold Bending Forming Machine Cal 20, Cal 22:

Hydraulic decoiler--Guiding--Embossing--Roll forming--Hydraulic cut--Out table

AD730 is the classic Chilean version, the height of metal deck is 73mm. this line is exported to Chile, wall plate structure, two 15kw motors, 28 passes forming.

Pictures of Chile AD730 Metal Deck Cold Bending Forming Machine Cal 20, Cal 22: