Active Member
|
[China]
Address: Botou city Cangzhou city Hebei province China
Contact name:zhang
cangzhou tuoming machine co.,ltd |
|
|
| Roller: | 18 Rollers | Motor: | 5.5 Kw |
|---|---|---|---|
| Style: | Servo Motor | H Steel: | 400 Mm |
| Color: | Bule And Orange | Thickness: | 0.3-0.7 Mm |
| Speed: | 0-4m/min |
5.5 kw Servo Motor Glazed Tile Roll Forming Machine High speed 4 m/min
Details
| Material | color coils and galvanized coil | |
| Width of the material | 100mm | |
| Machine sizes | 7760 x 2000 x1500mm | |
| Motor | 4 + 4 kw | 5.5 kw Servo Motor |
| weight | 7.2 ton |
Installation matters
The mold used in the tile press equipment requires an upper mold and six lower molds of the same size. The upper mold and the lower mold are installed first. The lower mold is directly mounted on the hexagonal wheel worktable. The upper mold is installed on the bottom surface of the slide, and place the appropriate thickness of the plate, ensure that after the upper and lower molds are closed, the gap around the four even, the distance between the upper and lower mold is equal to the thickness of the required blank. Then the above model shall prevail.
The workbench is indexed, and the rest of the five lower molds are installed. After all the upper and lower molds are installed, the car can be pressed.
| Voltage | 380V 50 HZ 3 Phases |
| Hydraulic oil | 40 # oil |
| roller diameter | Diameter 70 mm |
whatsApp/wechat: +8618232715995
Email:tuoming_jason@163.com
