Active Member
|
[China]
Address: No. 1, Xingyuan Road, Gu Shan Town, Jiangyin city, Jiangsu Province, China
Contact name:Emma Teng
Jiangyin Dingbo Technology Co., Ltd |
|
|
Roof panel roll forming machine
Roof panel roll forming machine description
Roof panel roll forming machine in Dingbo Technology Co., Ltd. is a large class of machines. The products produced by this type of machine are widely used in roofs, waterproofing, walls and so on. Including trapezoidal panel, corrugated panel, roof tile, glazed tile, metal deck, wall panel, standing seam, K span, ridge cap, gutter and downspout.
The normal machinable material thickness range of our roof panel roll forming machine is 0.3mm-0.8mm, the standard or more used in international market is Gauge 26 (0.45-0.5mm), working raw material is PPGI, Galvanized steel, Galvalume steel,Aluminum,etc. We design roll forming machine’s configuration according to your drawing, specially the pitch and height of each wave. Dingbo Technology is always your best choice of roof panel roll forming machine.
Regarding the different types of our machines, they are classified as follows:
| Items | Specifications | |
| Material of coil | Material | Color steel |
| Material Width | As per sketch | |
| Material Thickness | 0.3-0.8mm | |
| Forming system | Rolling Speed | 0-15m/min |
| Roller Stations | 19Stations for upper layer 23Stations for lower layer | |
| Roller Material | 45#steel 0.03-0.05mm chromed | |
| Shaft Material | 45#steel | |
| Shaft DIA | D70mm | |
| Main Motor Power | 5.5kw | |
| Side Plate | Wall plate | |
| Way of Drive | By chain | |
| Cutting system | Hydraulic cutting Power | 3kw |
| Material of blade | Cr12Mov | |
| Tolerance | +1.5mm | |
Electrical control system
| Electric Source | 380V, 50HZ,3 phase |
| PLC Control System | Panasonic | |
| Encoder | Omron |
1.IBR roll forming machine
2.corrugated roll forming machine
