Jiangyin Dingbo Technology Co., Ltd |
|
Custom Cable Tray Roll Forming Machine Precision 1 mm Thickness
General Description
Cable tray forming machine is also called cable tray cable
ladder machine. Cable trays produced by cable tray roll forming
machine are widely used in construction fields because of high
robustness and precision. As we have rich and special experience,
we can customize cable tray roll forming machines or cable tray
roll forming production lines according to customers' profile
drawings and specifications.
Features
1. We adopt servo feeding technology to make sure that the punching
accuracy can reach more or less than 0.15 mm so that the punching
precision can be improved.
2. Considering sheet distortion caused by rear cutting, cable tray
roll forming machine made by shenghong is designed with front
cutting device. The front-cutting sheet can be fed into the roll
former correctly because of the existence of a proper guiding
device.
3. The punching device structure is flexible enough to replace
punch moulds. At the same time, in order to protect the operator
during replacement, necessary safety facilities are used.
4. Our cable tray roll forming machine can be customized
according to the demands of customers.
Technical Specifications for Cable Tray Roll Forming Machine
Raw material | Item | Parameter | Remark |
Material type | cold rolled steel/galvanized sheet | Special material shall be tested before finalization | |
Thickness | 1mm | Big range of thickness may cause forming dimension tolerance | |
Yield strength | Q235 | - | |
Production | Profiling section | As per customer's requirement | The basic element for quotation |
Machine material | Roller material | Gr12 | - |
Shaft material | 40Cr | - | |
Rolling station wall material | QT470 | - | |
Shearing blade material | Cr12 | - | |
Line speed | Roll forming speed | 12m/min | - |
Punching | Punch | Depend on hole size | Interchangeable die |
Transmission | Gear | - | - |
Straightening | Roller straightening | - | - |
Shearing | Pre-cut | - | Precision±1.5mm/6000mm |
Run-out table | Simple table | 2 meters at each | As per customer's requirement |
Hydraulic system | Valve and pump | - | Brand can be optional |
Controller system | PLC | - | Mitsubishi or same level |
Coil car | Coil car | 3t/5t | option |
Machinery Photos