Active Member
|
[China]
Address: No. 1, Xingyuan Road, Gu Shan Town, Jiangyin city, Jiangsu Province, China
Contact name:Emma Teng
Jiangyin Dingbo Technology Co., Ltd |
|
|
INTRODUCTION:
A. Technical parameters
| 1 | Raw material | stainless steel coil or aluminum steel coil |
| 2 | Material thickness | max 1.6mm |
| 3 | Material width | 1300mm |
| 4 | Decoiler inner diameter | 508mm |
| 5 | Decoiler outer diameter | 900-1100mm |
| 6 | Material weight | 5t |
| 7 | Main motor power | 15KW |
| 8 | Shaft diameter | 450mm |
| 9 | Embossing speed | about 12m/min |
| 10 | Dimension of embossing machine | 1900mm*1600mm*1850mm |
| 11 | Transducer type | Danfoss from America |
| 12 | Recoiler drive power | 4KW |
| 13 | Recoiler inner diameter | 508-610mm |
| 14 | Recoiler outer diameter | 1250mm |
| 15 | Tension machine power | 3KW |
| 14 | Hydraulic pressure | 12MPa |
| 15 | Voltage | 380V & 50HZ & 3phases |
B. Main components
1. Hydraulic decoiler with coil car: 5 tons.
2. Pre-flattening device.
3. Main embossing machine.(2 sets rollers.)
4. Post- flattening device.
5. Tension machine.
6. Hydraulic recoiler with coil cart: 5 tons.
Photos of samples made by high quality embossing machine for steel coil:
We can provide you not only good quality embossing machines for steel coils but also good after-sale service.
