Active Member
|
[China]
Contact name:Eason
WUXI HENGRUIYANG INTERNATIONAL CO., LTD |
|
|
0.3-3.0mm leveler shear machine ,leveler machine with shearing part ,metal straightening machinery
1. Basic technical parameters of coil plate
| NO. | Item | Parameter |
| 1 | Thickness of middle plate | 0.3-3.0mm |
| 2 | Shaft | 15 |
| 3 | Diameter of shaft (solid shaft) | 105mm |
| 4 | Material of shaft (solid shaft) | (high grade) 45# Steel, quenched and tempered
treatment,hard chromize coated |
| 5 | Drive type of roll forming machine | drive by chain |
| 6 | Chain | 25.4 mm (high grade) |
| 7 | Bearing | 6210 (high grade) |
| 8 | Reducer | 6# cycloid reducer (high grade) |
| 9 | Power of main motor | 7.5KW |
| 10 | Voltage | 380V/50Hz/3phase |
| 11 | Line speed | about 0-9 m/min
|
| 12 | Feeding width | 0-1000mm |
| 13 | Suitable coil thickness | Max thickness for steel coil is 3.0mm |
| 14 | Appearance size of main machine | 1.5m (length)*1.2m (width) *1.2m (height)
|
2. Main technical parameter:
a) line speed: 0-40m/min, 0-80m/min
b) length-fixing: 500~5000mm
c) Cutting quantity 10pcs/min. length of 2000mm in average
d) Length precision: ±0.5(L=1000mm)
e) Diagonal length precision: ±0.5(L=1000mm)
f) Leveling accuracy: ±1mm/m2
g) Total power: 80KW
3. Component of HR/CR steel cut to length line
a) Coil-loading car 1set
b) Double-mandrel decoiler 1set
c) Coil-head guide, press&shoveling 1set
d) Aligning centerline machine 1set
e) Double-roller pinch feeding, thirteen-roller leveling 1set
f) Encoder 1set
g) Hydraulic shearing machine 1set
h) Transmission extractor 1set
i) Pneumatic piling-up device 1set
j) Hydraulic up-down stacking station 1set
k) Coil discharging car 2set
l) Hydraulic system 1set
m) Pneumatic system 1set
n) Electric control system 1set
1. The correct use of solid bearing steel, high frequency heat
treatment after grinding, hard chromium plating, corrected by this
machine is smooth smooth without indentation, not damage of
material surface;
2. The machine can be used alone, also can cooperate MT, MTD
automatic feeding frame is used, along with all the better;
3. The machine adopts large cylinder pressure, correct adjustment
adopts synchronous worm gear and worm adjustment.Rotates a circle,
correction on wheel fell by 1 mm can make fine adjustments
4. High mechanical structure rigidity, high power output.For high
speed and stable feeding, improve production efficiency, prolong
the equipment use fixed number of year
5. The machine adopts Japanese electric rolling contact zhi and
electronic parts, less failure, long life;
