|
[China]
Trade Verify
Address: Building 2#,No.1000 Tiangong Avenue,Xinxing Street,Tianfu New Area,Chengdu Sichuan Province, 610213, China
Contact name:Zander
Sichuan Trixon Communication Technology Corp.,Ltd |
|
Verified Suppliers
|
|
|
TSB-3GM3-53DCR 3.125G BIDI Bi-directional Distance 300M 1550nm/1310nm,SMF 0℃~+70℃
SFP Transciver Module is a low cost, hot pluggable, single fiber, single 3.3V power supply and TTL logic interface module. It provides transmission and reception of optical signals over a single mode fiber up to 10km. It is designed for Digital Diagnostic Monitoring Interface (DDMI) and Long Reach (LR) applications. It supports a wide temperature range from 0℃ to +70℃. It is equipped with single LC connector interface and is compliant with SFP MSA and IEEE802.3z standards.
| Parameter | Value |
|---|---|
| Connector Type | Single LC Connector Interface |
| Wavelength | 1550nm/1310nm |
| DDMI | YES |
| Data Rate | Operating Data From 2.5~3.125 Gbps |
| Distance | 300m |
| Temperature Range | 0℃~+70℃ |
| Power Supply | Single 3.3V Power Supply And TTL Logic Interface |
| Product Name | 3.125G SFP Bidirectional Transceiver |
| Fiber Type | SMF |
| Pluggable | Hot Pluggable |
(300m-3km)
| Parameter | Symbol | Min | Typ. | Max | Unit | Note | ||
| Transmitter | ||||||||
| Centre Wavelength | λc | 1290 | 1310 | 1330 | nm | 1310nmTX/1550nmRX | ||
| 1530 | 1550 | 1570 | nm | 1550nmTX/1310nmRX | ||||
| Spectral Width*Note4 | ∆λ | 1 | nm | |||||
| Average Output Power | POUT | -9 | -3 | dBm | ||||
| Extinction Ratio | ER | 3.5 | 5.8 | dB | ||||
| 5 | 8 | |||||||
| Average Power of OFF Transmitter | POFF | -45 | dBm | |||||
| Output Optical Eye | Compatible with ITU-T G.957 | |||||||
| Receiver | ||||||||
| Centre Wavelength | λc | 1290 | 1310 | 1330 | nm | 1310nmTX/1550nmRX | ||
| 1530 | 1550 | 1570 | nm | 1550nmTX/1310nmRX | ||||
| Sensitivity*Note5 | PIN | -16 | dBm | |||||
| Receiver Overload | Overload | 0 | dBm | |||||
| LOS Assert | LOSA | -30 | dBm | |||||
| LOS De-Assert | LOSD | -17 | dBm | |||||
| LOS Hysteresis | 0.5 | dB | ||||||
Note4: VSCEL LD and FP LD measured spectral width RMS, DFB LD measured spectral width –20dB.
Note5: Minimum average optical power measured at the BER less than 1E-12@pattern is PRBS223-1@ER=10dB.
Local Area Networks (LANs): The module can be used in LAN environments to establish high-speed connections between network switches, routers, and other network devices. It facilitates efficient data transmission within the LAN infrastructure.
Metropolitan Area Networks (MANs): It is suitable for use in MANs, providing connectivity between different sites within a metropolitan area. The module supports high-speed communication over medium distances, enabling reliable data exchange.
Video Surveillance Systems: The module can be deployed in video surveillance systems, facilitating the transmission of high-quality video data over long distances. It enables reliable communication between cameras, recording devices, and control centers.
Fiber-to-the-Home (FTTH): It can be used in FTTH deployments to provide high-speed broadband connections to residential or business premises. The module enables efficient data transmission over the fiber optic network, supporting high-bandwidth applications.
Industrial Networking: The module finds applications in industrial networking environments, where reliable and high-speed communication is required. It can be used in industrial automation systems, control networks, and other industrial applications that demand robust connectivity.
Contact the manufacturer: Reach out to the manufacturer or supplier of the TSB-3GM3-53DCR transceiver module and inquire about their customization capabilities. Provide them with detailed information about your specific requirements.
Specify your customization requirements: Clearly communicate your customization needs to the manufacturer. This may include desired specifications, performance parameters, temperature range adjustments, power consumption optimization, or any other specific features you require. The more detailed and specific you can be, the better the manufacturer can understand your needs.
Consult with the manufacturer: Engage in discussions with the manufacturer to explore the feasibility of your customization requests. They will be able to provide guidance, technical expertise, and recommendations based on their capabilities and experience. They can also advise you on any limitations or trade-offs associated with the customization.
Evaluate cost and lead time: Customization may involve additional costs and could impact lead times. Discuss these factors with the manufacturer to understand the pricing and production timeline associated with the customization. Consider the trade-offs between customization, cost, and time considerations.
Review and finalize: Once you have discussed and agreed upon the customization details, review the proposed specifications, pricing, and any other relevant factors. Ensure that both parties have a clear understanding of the customization scope before finalizing the order.
We provide a range of technical support and services for SFP Transceiver Module. Our team of experts is on hand to answer any queries you may have and provide assistance in the installation and maintenance of the product.
We provide pre-sales support for SFP Transceiver Module, offering advice on the product’s features and capabilities, as well as information on compatibility with your existing system. Our team of knowledgeable engineers can also help you determine the best product for your specific needs.
We provide installation and maintenance services for SFP Transceiver Module. Our team of experienced technicians can assist with the installation of the product, as well as provide guidance on how to best use the product. We can also provide ongoing maintenance and troubleshooting services.
We offer technical support for SFP Transceiver Module. Our team of experts can provide assistance with any technical issues you may encounter with the product, as well as offering advice on what steps to take to ensure the product is running optimally.
Packaging and Shipping for SFP Transciver Module:
Each SFP Transciver Module is packaged in an anti-static bag and then placed in a box. The box is designed to protect the SFP Transciver Module from any damage during shipping. The box is then sealed and labeled to indicate its contents and the destination address.
When the SFP Transciver Module is packaged and ready for shipping, it is sent to the customers through an express shipping carrier. The packages are then tracked and monitored in order to ensure safe and timely delivery.
Reference Datasheet File code: DS100045
