GE FANUC IC693CHS392 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER (PLC)

GE FANUC IC693CHS392 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER (PLC)

Technical Specifications for IC693CHS392

Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc (Former); Emerson Automation (Current)
Part Number IC693CHS392
Series Series 90-30
Description Expansion baseplate
Product Description 10-slot expansion baseplate
Voltage 5 Volts DC
No. of I/O slots Ten (10)
Current 150 milliAmps
No. of CPU slots None
Compatibility 90-30 PLCs
Slot 1-5 assignment I/O modules; Option modules

P/S Slot Power Supply Module
Installation Environment Indoor Environments Only
Expansion slot 25-pin D-shell female connector
Maximum Number of CPUs Supported 7
Maximum expansion cable length 50 feet or 15 meters
Dimensions 443 x 142 x 130 millimeters
Expansion baseplate Supported
Product Lifecycle Status* Discontinued/Obsolete
Dimensions 17.44 x 12 x 5.59 in
Mounting Panel mounting
Internal Power consumption 150 mA at 5 VDC
Product Lifecycle Discontinued

 

 

 

About IC693CHS392

The IC693CHS392 is a Series 90-30 Platform compatible Expansion baseplate. This hardware allows

interconnection of the additional baseplate that hosts Series 90-30 modules to maximize the central controller’s

capability and comply with the control requirement of the system especially to accommodate a higher number

of I/O points and implement specialty functions. The IC693CHS392 is formerly manufactured by GE Fanuc

Automation that is now acquired by Emerson Automation. This baseplate provides Ten (10) installation slots

where up to 10 Series 90-30 standard I/O modules and option modules can be installed. This baseplate is

compatible for use with CPUs 331, 340, and 341 wherein a maximum of Four (4) baseplates can be

interconnected and CPU 350 and higher wherein up to Seven (7) can be installed. When interconnecting

baseplates to the CPU baseplate, the maximum cable length must not exceed 50 feet or 15 meters otherwise,

the expansion baseplate cannot be recognized by the CPU or the entire configuration is invalid. In addition,

intelligent modules such as the PCM, ADC, BEM330, and CMM modules are not compatible with installation to

the expansion baseplate. These modules are installed on the CPU baseplate. Aside from the I/O slots, a power

supply slot is provided to this baseplate where the power supply module that is used to energize and distribute

power is installed. Expansion ports are also available allowing interconnection of other expansion baseplates.

This baseplate is designed for panel mounting only, fastened through the provided mounting tabs located on

the extreme left and right sides of the hardwire. Proper grounding must also be observed to protect modules

and minimize electrical noise.

The IC693CHS392 baseplate is an expansion baseplate by GE Fanuc. It is compatible with a Series 90-30 GE

PLC system. It is a PLC chassis but it can also be used as an extension for other I/O that are in a different

location. The baseplate is used along with a PLC system or by connecting it with a personal computer that is

using a PCI card. It can connect up to 7 CPUs at a time depending upon the CPU model. The baseplate is

powered with a voltage rating of 5 Volts DC. It has a current rating of 150 milliAmps. The baseplate is 443

millimeters in length, 142 millimeters in width, and 130 millimeters in height. The IC693CHS392 baseplate is

equipped with a 25-pin female D-type I/O expansion connector on the right side for efficient connection with

other baseplates.

The IC693CHS392 baseplate has a power supply port, a CPU slot, and non CPU slots. It can easily be mounted

in a Series 90-30 PLC system. A DIP switch is also present in the baseplate along with all of the slots. The

IC693CHS392 baseplate is built with open architecture and it can be easily accessed during the installation and

replacement processes. It can be used for indoor applications only and it should be thoroughly protected

against water splashes. The baseplate should be kept away from all sources of dust and heat. The expansion

slot supports many devices but not intelligent option modules like the PCM, ADC, and CMM devices. During the

installation process, the distance between the interconnecting expansion baseplate plate and CPU baseplate

should not be more than 15 meters.

 

 

 

Terms

1. We ships worldwide and accepts T/T and Paypal.
2. All items are subject to availability and passing our QA testing and inspection.
3. Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.

Shipping

1. We ship worldwid use UPS, FedEx, DHL, or Truck when needed.
2. Call to use a shipping service other than the ones listed.
3. International Customers are responsible for all Customs fees, VAT, and other fees applied by their respective countries.

FAQ