GE FANUC IC693MDL340 Discrete Output Module 16 Channels 85 - 132 VAC

GE FANUC IC693MDL340 TYPICAL SCAN RATE SERIES 90-30 PROCESSOR MODULE

 

Technical Specifications for IC693MDL340

Brand	GE Fanuc
Series	Series 90-30
Manufacturer	GE Fanuc
Product Description	Discrete output module
Part Number	IC693MDL340
No of Channels	Sixteen (16)
Brand	GE Intelligent Platforms/GE Fanuc
No. of groups	Two (2)
Product Type	Output Module
No. of channels per group	Eight (8)
Rated Voltage	120 V AC
Output signal range	85-132 VAC
Output Voltage Range	85 to 132 V AC
Nominal output voltage	120 VAC
Frequency	50 to 60 Hz

Output current per point	0.5 A
Outputs	16
Output current per group	3:00 AM
Isolation between field side and logic side	1500 V
Inrush current	20 A for one cycle
Isolation between each group	500 V
On Response time	1 ms
Max. Output Voltage Drop	1.5 V
Off response time	½ cycle
Max. Output Leakage Current	2 mA at 120 V AC
Isolation	1500 volts between field side and logic side; 500 volts between each group
Min. Output Leakage Current	1 ms
Minimum Load Current	50 mA
Product Lifecycle Status	Discontinued/Obsolete

 

 

About IC693MDL340

The IC930MDL340 is a Series 90-30 Discrete output module. This module is manufactured by formerly by GE Fanuc, now under Emerson Automation. This module has Sixteen (16) output channels with each channel able to deliver an output voltage rated 120 VAC and output current rating of 0.5 A.

This module has Two (2) groups of output channel where each group having Eight (8) channels each. Additionally, One (1) common terminal is provided per group providing isolation.

The IC930MDL340 is typically used to energize electrical loads such as relay coils, pilot lamps and other electrical devices with low current rating. It is used to implement output commands as a result of the processing of the downloaded user logic to the CPU. It has maximum output current of 3 A per group and minimum load current of 50 mA.

Other output characteristics of this module includes a maximum inrush current of 20 A for one cycle and minimum load current of 50 mA. It has an output voltage drop of 1.5 VAV and maximum output leakage current of 2 mA at 120 VAC nominal voltage. Each output channel has maximum On transition delay of 1 ms and Off signal delay of ½ cycle. This module has power consumption of 315 mA with all output channels energized.

The IC930MDL340 is provided with individual status indicator for each output channel. It depicts the operational state of each channel of this output module. It also provided with Fuse indicator LED which energizes when the internal fuse is blown.

The GE Fanuc IC693MDL340 module is an output module manufactured as part of the GE Intelligent Platforms/GE Fanuc Series 90-30 product line. It has a 120 Volts AC voltage rating and 0.5 Amps of current rating and it provides 16 output points in 2 separate groups, and each group has 8 points with individual common per group. The IC693MDL340 module allows each group to be used with an independent phase of the AC power supply. Both commons can also be powered using the same supply. Each group has a 3-Amps fuse for protection, as well as an RC snubber for the outputs for protecting them against the power line transient electrical noise.

The GE Fanuc IC693MDL340 module features an 85 to 132 Volts AC output voltage range, 50 to 60 Hertz frequency, and 0.5 Amps of maximum output current per point. Each group allows for an all-out current for each group of 3 Amps. The IC693MDL340 module offers an inrush current of high degree, which makes the outputs suitable for controlling different loads, both incandescent and inductive. The operators of this module must provide an AC power supply to the module to help it operate loads connected to the outputs. The IC693MDL340 module can only run on an AC source of power. It comes with LED indicators on top of the device, which show the ON and OFF status for each of the output points. The LEDs are arranged in 2 rows of 8 green LEDs and with a red LED between the 2 lines.

 

 

 

 

 

 

 

 

Terms

1. We ships worldwide and accepts T/T and Paypal.
2. All items are subject to availability and passing our QA testing and inspection.
3. Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.

Shipping

1. We ship worldwid use UPS, FedEx, DHL, or Truck when needed.
2. Call to use a shipping service other than the ones listed.
3. International Customers are responsible for all Customs fees, VAT, and other fees applied by their respective countries.

FAQ