|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
DS200FCSAG2A Current Sensor Interface Board General Electric in the
LS2100 Series
DS200FCSAG2A Technical Specifications
Catalog Number DS200FCSAG2A
Available Revisions DS200FCSAG2ACB
Board Type Current Sensing Feedback Board
Manufacturer General Electric Company USA, GE Industrial Systems
Series LS2100
Instruction Guide GEH-6678
Parts Manual GEI-100222
Functional Acronym/Abbreviation FCSA
Mounting Location Static Starter Power Conversion Cabinet
Frequently Asked Questions about DS200FCSAG2A
What is the DS200FCSAG2A?
The DS200FCSAG2A is a Current Sensor Interface Board that uses the
abbreviation FCSA in GE documentation.
Is there a parts-specific manual for the DS200FCSAG2A model?
Yes! The parts-specific manual for the DS200FCSAG2A model is the
GEI-100222 manual. This manual is not widely available online but
information on this board can be found within the GEH-6678G LS2100
Installation and Startup Users Guide attached in the Manuals tab on
this page.
The DS200FCSAG2A board can sometimes be found in the Mark V Series
from General Electric. How can I be sure that the DS200FCSAG2A can
be used with the LS2100 Series?
In the GEI-100476 ControlST Manual, there is a page that detail all
of the boards that are in the LS2100 Series. On page two hundred
and ninety-three, the DS200FCSAG1A board is listed as boards within
the LS2100 Series, along with documentation that can be used when
operating and installing the FCSA boards.
How do I check to ensure that the voltage of the FCSA is correct?
To check for the correct voltage verify the voltages at the
following points of the LEMPS plug, N15 (pin 3), P15 (pin 1), and
ACOM (pin 2), once verified you can reconnect the LEMPS plug at the
FCSA-L (load bridge).
Is there a difference between the CPSL and LEMPS connectors on the
DS200FCSAG2A board?
The primary difference between the CPSL and LEMPS connectors is the
number of pins. Both connectors are used with power control.
What should I do to ensure that there are no power errors when the
DS200FCSAG2A board is being used?
If you suspect that there might be power errors on the DS200FCSAG2A board it is best to unplug the LEMPS connector
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| ABB Module | AB Module 1756-,1759- Tourch Screen 2711- |
| Mitsubishi Drive MR- , Motor HA -,HC | Emerson MoudlesVE- ,KJ - |
| Fanuc motor A0-, Drive | Yokogawa transmitter EJA- |
| Rosemount Transmitter 3051- | Schneider Module 140- |
| Panasonic Motor , Drive MH- | Siemens Module 6ES-, Touch Screen 6AV- |
Similar prodcut for GE Fanuc IC693CMM321
| Part Number | Description |
All Parts Commonly | Call Parts Super Center 800-727-8443 |
| 106B7033P1 | Operating Arm, IC9445 Lever Limit Switch |
| 106B7085G5 | Cam Follower, IC9446 Rotating Limit Switch |
| 117A7920P1 | Roller, IC9445 Lever Limit Switch |
| 129B5749P1 | Star Wheel, IC9445 Lever Limit Switch |
| 144A4871P2 | Shaft, IC9445 Lever Limit Switch |
| 1970369P7 | Weight for Operating Arm, IC9445 Lever Limit Switch |
| 721B773G1 | Contact Unit, IC9445 Lever Limit Switch |
| 721B773G3 | Contact Unit, IC9445 Lever Limit Switch |
| Limit Switch, Lever, General-purpose, Standard Contact, 1 Circuit, IC9445 Lever Limit Switch | |
| IC9445A200AB | Limit Switch, Lever, General-purpose, Standard Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445A200AC | Limit Switch, Lever, General-purpose, Maintained Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445A204AM | Limit Switch, Lever, General-purpose, Snap Action Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445B200AA | Limit Switch, Lever, Watertight, Standard Contact, 1 Circuit, IC9445 Lever Switch |
| Limit Switch, Lever, Watertight, Standard Contact, 2 Circuits, IC9445 Lever Limit Switch | |
| IC9445B200AC | Limit Switch, Lever, Watertight, Maintained Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445B206AM | Limit Switch, Lever, Watertight, Snap Action Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445B206AN | Limit Switch, Lever, Watertight, Snap Action Contact, 1 Circuit, IC9445 Lever Limit Switch |
| IC9445C200 | Limit Switch, Lever, Weight, Cable, General-purpose, IC9445 Lever Limit Switch |
| IC9445C208 | Limit Switch, Lever, Less Weight, Cable, General-purpose, IC9445 Lever Limit Switch |
| IC9445D200 | Limit Switch, Lever, Weight, Cable, Watertight, IC9445 Lever Limit Switch |
| IC9445D204 | Limit Switch, Lever, Less Weight, Cable, Watertight, IC9445 Lever Limit Switch |
| IC9445H200AA | Limit Switch, Lever, Watertight Bronze, Standard Contact, 1 Circuit, IC9445 Lever Limit Switch |
| IC9445H200AB | Limit Switch, Lever, Watertight Bronze, Standard Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445Y100 | Lever, Straight, Molded Phenolic, 4 Inch, IC9445 Lever Limit Switch |
| IC9445Y101 | Lever, Straight, Hardened Steel, 4 Inch, IC9445 Lever Limit Switch |
| IC9445Y102 | Lever, Forked Roller, Harden Steel, IC9445 Lever Limit Switch |
| IC9445Y103 | Lever, Straight, Hardened Steel, 4 Inch, IC9445 Lever Limit Switch |
| IC9445Y106 | Lever, Crane Hoist Hook, 6 Feet Cable, IC9445 Lever Limit Switch |
| IC9445Y108 | Lever Straight, IC9445 Lever Limit Switch |
| IC9445Y110 | Lever, Fork, IC9445 Lever Limit Switch |
| IC9445Y111 | Lever, Straight, Molded Phenolic, 7 Inch, IC9445 Lever Limit Switch |
| IC9445Y112 | Lever, Straight, Molded Phenolic, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y113 | Lever, Offset, Molded Phenolic, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y114 | Lever, Straight, Hardened Steel, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y115 | Lever, Straight, Hardened Steel, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y116 | Lever, Straight, Composition Rubber, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y138 | Lever, Hardened Steel, 7 Inch, IC9445 Lever Limit Switch |
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass
production.
Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive.
Airline and sea shipping also optional.
Secondly, during the guarantee period, we will send new lights with
new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution
including re-call according to real situation.
