|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
IC660CBB903K GE FANUC PLC Logic Controller Series Six I/O Bus Controller
Quick Details
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| ABB Module | AB Module 1756-,1759- Tourch Screen 2711- |
| Mitsubishi Drive MR- , Motor HA -,HC | Emerson MoudlesVE- ,KJ - |
| Fanuc motor A0-, Drive | Yokogawa transmitter EJA- |
| Rosemount Transmitter 3051- | Schneider Module 140- |
| Panasonic Motor , Drive MH- | Siemens Module 6ES-, Touch Screen 6AV- |
The GE Fanuc IC660CBB90xx Series BUS Control Modules are a required
interface between a Series Six Plus PLC and the Genius I/O blocks
when they are included in the PLCs I/O system. The Bus Controller
module can be placed in any I/O slot in the CPU or in a
high-capacity I/O rack located in a CPU station or Local I/O
station up to 2000 feet (600 meters) from the CPU. Multiple Bus
Controllers can be placed in one rack. Since each Bus Controller
consumes 20 units of load, up to 5 modules can be placed in a CPU
rack, or 10 modules in a high capacity I/O rack.
A Bus Controller can be placed in an I/O rack in a Remote I/O
station if the CPU scan time is greater than 10 ms. However,
because of the reduced capacity of the serial I/O communications
link, window commands would not be supported. Each Bus Controller
can interface up to 30 Genius I/O blocks to the Series Six Plus CPU
by twisted pair communications up to 2000 feet (600 meters). The
only limit to the number of Bus Controllers in any one PLC system
is the l/O capacity of the Series Six Plus CPU. Each Bus
Controller, similar to any I/O module, has access to all l/O
references on its I/O chain.
A 4-segment DIP switch located on the module is used to enable
channel selection for Expanded I/O addressing. If Normal
(non-expanded) addressing is used or if channel selection is made
through I/O Transmitter Modules, no switch setting is necessary.
The Genius I/O bus must be terminated at the Bus Controller by its
characteristic impedance. The enhanced version Bus Controller
provides three selectable on-board impedances, 100Ω, 150Ω, or 750Ω.
Three jumpers (JPI, JP2, and JP3) on the module are used to select
one of the listed values, or to select no impedance.
OTHER SUPERIOR PRODUCTS
FAQ
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.
Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
