|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
AB 1746-NI16I I/O Module has Sixteen (16) Inputs configurable for 0
to 20 mA 4 to 20 mA
Product information AB 1746-NI16I :
The Allen Bradley 1746-NI16I is an Analog Input Module, with 16-bit
resolution and 16 input channels. This module falls into a Voltage
Category of -20 to 20 mA. Its backplane current at 5 Volts is 125
mA, while 24 Volts results in 75 mA. Its backplane power
consumption is 2.425 Watts maximum (0.625 Watts at 5 Volts DC and
1.8 Watts at 24 Volts DC). The common mode voltage range of this
module is +/-10.25 Volts relative to the analog common terminal.
This unit has a relative humidity of 5% to 95% without
condensation. Its operating temperature range is -25 to 60 degrees
Celsius (-13 to 140 degrees Fahrenheit) while its nonoperating
temperature lies between -40 and 85 degrees Celsius (-40 and 185
degrees Fahrenheit). Its Input impedance is 249; its maximum
voltage input is ±8 Volts between analog common and any input
terminal, and the maximum current input is ±30 mA. The thermal
dissipation of this module is 2.43 Watts, and the AIFM Connector of
this module is 25-pin D-shell.
When installing modules in the chassis, it is not necessary to
remove the terminal blocks from the module. However, if the
terminal block is removed, use the label located next to the
terminal block to identify the location and type of module.
Analog inputs are used to interface analog process variables to
measure its magnitude. It is primarily used to monitor or used as
feedback signal for closed loop control systems to implement manual
or automatic control with the use of control methods typically
Proportional-Integral-Derivative (PID) algorithm. Without this
feedback signal, automatic control cannot be fully implemented.
The 16 high-impedance input channels can be wired as single-ended
inputs. The module provides a direct interface to the following
input types:
• ±10V dc
• 1 to 5V dc
• 0 to 5V dc
• 0 to 10V dc
• 0 to 20 mA
• 4 to 20 mA
• ±20 mA
• 0 to 1 mA
More information:
| Manufacturer | Rockwell Automation |
| Brand | Allen-Bradley |
| Part Number/Catalog No. | 1746-NI16I |
| Series | SLC 500 |
| Module Type | Analog I/O Module |
| Backplane Current (5 Volts) | 125 milliamps |
| Inputs | Sixteen (16) |
| Backplane Current (24 Volts DC) | 75 milliamps |
| Electrical Signal type | 0 to 20 mA, 4 to 20 mA, ±20 mA, and 0 to 1 mA |
| Bandwidth | 6-250 Hertz |
| Chassis location | Any I/O module slot except slot 0 |
| IC694MDL230 | 120 VAC Isolated Input (8 Points) |
| IC694MDL231 | 240 VAC Isolated Input (8 Points) |
| IC694MDL240 | 120 VAC Input (16 Points) |
| IC694MDL241 | 24 VAC/VDC Input (16 Points) |
| IC694MDL250 | 120 VAC Isolated Input (16 Points) |
| IC694MDL260 | 120 VAC Input (32 Points)** |
| IC694MDL632 | 125 VDC Input (8 Points) |
| IC694MDL634 | 24 VDC Input, Neg/Pos Logic (8 Points) |
| IC694MDL645 | 24 VDC Input, Neg/Pos Logic (16 Points) |
| IC694MDL646 | 24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points) |
| IC694MDL654 | 5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points) |
| IC694MDL655 | 24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points) |
| IC694MDL660 | 24 VDC Input (32 Points)** |
| IC694ACC300 | Input Simulator Module (8 Points) |
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
