|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
IC697CPX928 CPU MODULE 96 MHZ 32-BIT FLOATING POINT 6 MBYTE MEMORY 3 SERIAL PORTS
Product information Siemens IC697CPX928 :
The GE Fanuc IC697CPX928 module is a CPU module based on the
80486DX4 microprocessor. It is manufactured by GE Fanuc Automation
as a member of the Series 90-70 product line and it has a clocked
speed of 96 megahertz.
This unit also supports the floating-point data as well as 32-bit
instructions. The CPU module comes of a medium-speed RAM with a
capacity of 6 MB that is backed-up by an integral lithium battery.
This battery is replaceable and the replaceable battery is the
IC697ACC701 battery. The battery is capable of retaining the data
stored in the RAM for a maximum of 6 months.
It has a nominal current of 3.1 amperes, with an input voltage
rating of 5 volts DC. This module has a forced air-cooling rating
of 70 CFM, and an operational ambient temperature ranging from 32
to 140 degrees Fahrenheit. With no air-cooling, the GE Fanuc
IC697CPX928 CPU module operates at a temperature range of 32 to 122
degrees Fahrenheit.
Based on the available power supply, the rack fan assemblies that
can be installed on the GE Fanuc IC697CPX928 CPU module include 240
Volts AC, 120 Volts AC, or 24 Volts DC rated rack fan assemblies.
This CPU module features 3 serial ports which are 2 RS-485
communication ports and 1 RS-232 communication port.
The serial ports are used for interfacing with the programming
devices for the configuration of the CPU. In addition, there is an
optional Ethernet module which can also be installed on to the PLC
to enhance the configuration of the GE IC697CPX928 CPU module by
using the Ethernet networks. This unit comes with a total of 7 LED
indicators which are placed in the front of module to enable
various status updates.
And other information:
GE Fanuc is a central processing unit (CPU) module from Series 90-70. This CPU features 6 Megabytes of battery-backed memory and 256 Kilobytes of non-volatile user flash memory, as well as a 96MHz processing speed and an average scan rate of 0.4 seconds per Boolean function. One RS232 serial port, two RS485 serial ports, and one Factory Reset port are available on this CPU.
| Manufacturer | GE Fanuc |
|---|---|
| Series | Series 90-70 |
| Part Number | IC697CPX928 |
| Product Type | CPU |
| Compatible With | GE Fanuc Series 90-70 PLCs |
| Microprocessor | 80486DX4 |
| Clock Speed | 96 MHz |
| RAM | 6 MB |
| Current | 3.1 Amps |
| Serial Ports | 3 |
About series of GE 90-70's advantage :
With our CPX family of CPUs, the Series 90-70 offers more for your
automation dollar—more computing power, more memory for your
applications, and more communications and redundancy capabilities.
And it provides increased flexibility for a variety of applications
due to a wide range of isolated and high-density VME analog I/O
modules.
Open Architecture Based on the VME-bus standard, the Series 90-70
can be used with thousands of boards produced by hundreds of
different manufacturers to build a solution that meets your exact
needs. These include links to drives and drive systems, servo motor
controllers, embedded solutions for vision systems and bus-to-bus
interface modules, as well as a variety of modules available from
GE (see accompanying table).
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
