Wisdomlong Technology CO.,LTD |
Verified Suppliers
|
|
GE IC697MDL940 OUTPUT MODULE 16 POINT RELAY OUTPUT 16 AMPS 120/240
VAC OR 5/24/125 VDC 480 VA OR 60 WATTS
Product information GE IC693MDL330 :
IC693MDL330 is a 120/240 volt, 2-Amp AC Output Module for the GE
Fanuc Series 90-30. The module provides four output points in each of its two isolated
groups for a total of eight. The two commons are not compound for
this module. This allows each group to perform on completely
individual AC-supplied phases. Alternatively, they can all also
work using the same supply. Each group also has the protection of a
5-ampere fuse for each common. There is an RC snubber in place for
each output to protect against transient electrical noise on the
power line.
The output voltage range for this module is 85 to 264 volts AC,
50/60 Hz. The output current is 2 amperes maximum per point. Per
group, the maximum is 4 amps at 40 °C (104 °F). The IC693MDL330
provides high-degree inrush current (10x the rated current/ 20
amperes maximum for one cycle), making the outputs suitable for
controlling a wide range of inductive and incandescent loads. The
minimum load current is 100 mA.
The user must provide AC Power for operating loads connected to
outputs. DC is not supported. The IC693MDL330 module has LED indicators at the top, which display
the ON/OFF status for each point. There are two horizontal rows
with eight green LEDs each, as well as one LED at the center
between the two rows. The eight upper LEDs, which are labeled A1
through 8, indicate output status. The red “F” LED indicates a
blown fuse, showing ON if this happens. The IC693MDL330 has an
insert between the inside and outside surface of the hinged door.
When the hinged door is closed, the surface facing the inside of
the module displays circuit wiring information, and circuit
identification information can be recorded on the external surface.
The external left edge of the insert is color-coded red to indicate
a high-voltage module. The IC693MDL330 has an ON response time of 1
ms maximum, while the OFF response time is ½ cycle maximum. Its
power consumption is of 160 mA (with all outputs on) from 5
voltages bus on backplane.
Rated Voltage | 120/240 volts AC |
Output Voltage Range | 85 to 264 volts AC, 50/60 Hz |
Outputs per Module | 8 (two groups of four outputs each) |
Isolation | 1500 volts between field side and logic side |
500 volts between each group | |
Output Current t | 2 amp maximum per point 4 amps maximum per group at 40 ° C (104°F) |
Output Characteristics | |
Inrush Current | 20 amps maximum for one cycle |
Minimum Load Current | 100 mA |
Output Voltage Drop | 1.5 volts maximum |
Output Leakage Current | 3 mA maximum at 120 volts AC |
6 mA maximum at 240 volts AC | |
On Response Time | 1 ms maximum |
Off Response Time | 1/2 cycle maximum |
Power Consumption | 160 mA (all outputs on) from 5 volt bus on backplane |
IC693MDL330 's details:
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.