|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
GE IC693MDL390 OUTPUT MODULE 2 AMP 5 POINT 120/240 VAC ISOLATED
Product information GE IC693MDL390 :
The IC693MDL390 is a Five (5) channel discrete output module that
belongs to the Series 90-30 product category of Programmable Logic
Controllers (PLC). Formerly manufactured by GE Fanuc now under
Emerson Automation, this module mainly features individually
isolated output channels, providing an output voltage range of
85-264 VAC and frequency of 50/60 Hz. Each output channel generates
a maximum of 2 Amperes per point while the maximum output current
per module at 45 Degree Celsius is 5 Amperes while a maximum of 2
Amperes can be generated at an operating temperature of 60 Degree
Celsius. Between each output point, the isolation rating is 500
Volts while field side to logic side isolation is rated at 1500
VAC. The output module generates a maximum inrush current of 25
Amperes for a single cycle while the minimum load current is 100
mA.
The maximum output voltage drop is measured at 1.5 Volts and the
maximum leakage current are 3 mA at 120 VAC and 6 mA at 240 VAC.
The module’s output ON state transition delay duration is 1 ms
while for OF response, the rated delay is ½ cycle. This module has
a backplane current draw of 110 mA when all outputs are energized.
Each output channel is provided with 3 A-rated fuses for
protection. In addition, Resistor - Capacitor snubber circuits are
also provided for eliminating transient electrical noise. It is
also provided with individual LED status indicators that depict the
energization state of each output and a single “F” LED intended for
fuse indicator is also provided for reporting of a blown fuse.
The IC694MDL350 is an AC output module from the PACSystem RX3i
Programmable Automation Controller (PAC) platform formerly by GE
Intelligent Platforms now by Emerson Automation. This module is
provided with Sixteen (16) individually isolated output channels
that delivers an output voltage rage of 74-265 VAC and frequency
range of 47-63 Hz. This module has power consumption of 315 mA when
all outputs are active, sourced from the 5VDC backplane supply. The
maximum output current rating of the module is 2 A when operated at
temperature of 30 Degrees Celsius or 1 A at 60 Degree Celsius.
The IC694MDL350 comes with field side to logic side and group to
group isolation ratings of isolation rating of 250 VAC, continuous
and 1500 VAC for 1 minute. Integrated diagnostic capability of this
module includes reporting of a removed or disconnected terminal
block.
For termination of field devices, the IC694MDL350 is required to
use either of the compatible removable terminal bases such as the
Box-style with catalog number IC694TBB032, Extended Boxstyle with
part number IC694TBB132, Spring-style with order number of
IC694TBS032, or Extended Springstyle with catalog number
IC694TBS132. This module occupies a single slot of the RX3i
backplane and must be installed along an RX3i CPU with firmware
version of 3.50 or later. This module is not compatible with the
Series 90-30 Platform.
Individual status indicators are provided to this module. The LEDS
are numbered that represent a particular module channel and also
comes with a “TB” LED that energizes when the terminal block is not
detected by the module.
| Rated Voltage | 120/240 volts AC |
| Output Voltage Range | 85 to 264 volts AC, 50/60 Hz |
| Outputs per Module | 5 (each output isolated from the others) |
| Isolation | 1500 volts between field side and logic side |
| Output Current t | 500 volts between each output 2 amps maximum per point 5 amps maximum per module at 45 ° C (113° F) |
| 2 amps maximum per module at 60 ° C (140° F) | |
| Output Characteristics | |
| Inrush Current | 25 amps maximum for one cycle |
| Minimum Load Current | 100 mA |
| Output Voltage Drop | 1.5 volts maximum |
| Output Leakage Current | 3 mA maximum at 120 volts AC |
| 6 mA maximum at 240 volts AC | |
| On Response Time | 1 ms maximum |
| Off Response Time | 1/2 cycle maximum |
| Power Consumption | 110 mA (all outputs on) from 5 volt bus on backplane |
IC693MDL390's details:
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
