|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
GE IC693CMM311 Series 90-30 Programmable Logic Controller 400 mA at
5V DC
Product information GE IC693CMM311 :
The IC693CMM311 is a communications coprocessor module from the
Series 90-30 PLC platform. This series of PLC particularly the
IC693CMM311 is formerly manufactured by GE Fanuc however, recently
acquired by Emerson Automation. This module provides CCM, Remote
Terminal Unit (RTU), and SNP connectivity to any controller that
hosts the module. Specifically, the IC693CMM311 is compatible for
use with modular Series 90-30 CPUs. The IC693CMM311 comes with Two
(2) communication interfaces such as Port 1 supporting RS232
standard and Port 2 supporting RS232 / RS422 and RS485 electrical
standards. Each port is a 25-pin D-shell interface.
This module is provided with a push to restart the communication
button to re-initiate communication without restarting the entire
module. The IC693CMM311 ports are configurable for a variety of
protocol combinations such as CCM protocol on both ports; CCM
protocol on port 1, RTU protocol on port 2; RTU protocol on port 1,
CCM protocol on port 2; RTU protocol on both ports; SNP and SNP-X
protocols on both ports; SNP and SNP-X protocols on port 1, CCM
protocol on port 2; CCM protocol on port 1, SNP and SNP-X protocols
on port 2; SNP and SNP-X protocols on port 1, RTU protocol on port
2; RTU protocol on port 1, SNP and SNP-X protocols on port 2.
Supported transmission speeds for CCM, SNP, and RTU are 300, 600,
1200, 240, 4800, 9600, and 19200 Baud rate. Compatible
pre-assembled cable is the Wye connection cable with catalog number
IC693CBL305. This module comes with MODULE OK, PORT 1 and PORT 2
tatus LED indicators for determining the module’s state of
operation.
The IC693CMM311 module is part of the Series 90-30 by GE Fanuc as a
CCM or Communications Coprocessor Module. It is designed to be a
high-performance device. The GE Fanuc Series 90-30 IC693CMM311
communications coprocessor module is compatible with all of the
modular CPUs in the GE Series 90-30 product line, but it cannot be
used with any of the embedded GE Series 90-30 CPUs such as the 311,
313, or 323 embedded GE CPUs.
Any GE Fanuc Series 90-30 PLC with a modular CPU will benefit from
the installation of the GE IC693CMM311 communications coprocessor
module and all of its features and functions. The protocols that
this communications coprocessor module can support are the SNP
protocol, the Modbus or RTU slave communications protocol, and the
GE Fanuc CCM communications protocol.
The GE Fanuc Series 90-30 IC693CMM311 communications coprocessor
module has 2 built-in serial ports known as Port 1 and Port 2. The
applications supported by Port 1 are RS-232 applications and the
applications supported by Port 2 are RS-232 applications and RS-485
applications.
Both of the ports are wired to the IC693CMM311 communications
coprocessor module’s one and only connector, which can make wiring
the module difficult, but the module comes with a GE Wye cable
known as the IC693CBL305 Wye cable that technicians can use to
separate the 2 ports and make wiring the module easier. The module
can be configured with a default setup or with configuration
software. Certain CPUs (models 331 and later) can support up to 4
of these communications coprocessor modules at a time in their CPU
baseplates.
More information:
| Mounting | Baseplate mounted |
| Mounting location | Series 90-30 CPU baseplate |
| RS-232 Applications | Supported |
| Module Location | CPU baseplate only |
| RS-485 Applications | Supported (Port 2 only) |
| Status LED indicators | Module OK; PORT1; PORT2 |
| Connection standard: | Port 1: RS232 Port 2: RS232 / RS422/RS485 |
| LED indicators: | Module OK; US1; US2 |
| Current load: | 400 mA |
| Product Lifecycle Status* | Discontinued/Obsolete |
| Port connections | 25-pin D-shell, female ports |
| Bus voltage: | +5VDC |
| Supported protocols: | CCM / RTU / SNP |
| Communication speed | 300, 600, 1200, 240, 4800, 9600 and 19200 Baud rate |
| Pre-assembled cable | IC693CBL305 |
| No. of CMM module per baseplate | 4 |
| Backplane current draw | 400 mA at 5VDC |
IC693CMM311 's details:
| IC694MDL230 | 120 VAC Isolated Input (8 Points) |
| IC694MDL231 | 240 VAC Isolated Input (8 Points) |
| IC694MDL240 | 120 VAC Input (16 Points) |
| IC694MDL241 | 24 VAC/VDC Input (16 Points) |
| IC694MDL250 | 120 VAC Isolated Input (16 Points) |
| IC694MDL260 | 120 VAC Input (32 Points)** |
| IC694MDL632 | 125 VDC Input (8 Points) |
| IC694MDL634 | 24 VDC Input, Neg/Pos Logic (8 Points) |
| IC694MDL645 | 24 VDC Input, Neg/Pos Logic (16 Points) |
| IC694MDL646 | 24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points) |
| IC694MDL654 | 5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points) |
| IC694MDL655 | 24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points) |
| IC694MDL660 | 24 VDC Input (32 Points)** |
| IC694ACC300 | Input Simulator Module (8 Points) |
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
