EJA530E-JBS7N-01CDL/M15/T06/D4/A Gauge Pressure Transmitter 4-20mA

 EJA530E-JBS7N-01CDL/M15/T06/D4/A Gauge Pressure Transmitter 4-20mA

 
Product Information Of : EJA530E-JBS7N-01CDL/M15/T06/D4/A

EJA530E : Gauge pressure transmitter

J : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

B : 0.1 to 2 MPa (14.5 to 290 psi)

S : Process connector:316L SST #; Diaphragm:Hastelloy C-276 *3# ; Others:316L SST #;

7 : 1/2 NPT male

N : Always N

-0 : Always 0

1 : Cast aluminum alloy

C : 1/2 NPT female, two electrical connections and a 316 SST blind plug

D : Digital indicator

L : 316 SST 2-inch pipe mounting

M15 : Material certificate---Process Connector

T06 : Pressure test/Leak test certificate---Test Pressure: 2 MPa (290 psi) ---Nitrogen(N2) Gas or Water Retention time: one minute

D4 : Calibration units---M calibration (kgf/cm2 unit)

A : Lightning protector---Transmitter power supply voltage: 10.5 to 32 V DC ( 10.5 to 30 V DC for intrinsically safe type,9 to 32 V DC

     for Fieldbus communication type.)

     Allowable current: Max. 6000 A ( 1×40 µs ), Repeating 1000 A ( 1×40 µs ) 100 times

     Applicable Standards: IEC 61000-4-4, IEC 61000-4-5

NOTE :

1> HART 5 or HART 7 is selectable. Specify upon ordering.

2> Hastelloy C-276 or ASTM N10276.

3> Not applicable for output signal code G.

4> Material traceability certification, per EN 10204 3.1 B

5> The unit on the certificate is always kPa/MPa regardless of selection of option code D1, D3 and D4

6> Applicable for capsule code B

7> Pure nitrogen gas or pure water is used for oil-prohibited use (option codes K1 and K2)

8> The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.

OTHER SUPERIOR PRODUCTS

What does "stirring up the market" mean, and why should it be avoided?
   Stirring up the market is what happens when many different suppliers are all contacted regarding the same part. It makes other suppliers believe the part is in much higher demand than it might actually be, resulting in raised prices and lower availability. In order to prevent this costly outcome,WTL highly recommends limiting the number of potential suppliers you reach out to for rare parts.

What forms of payment are accepted?
   We accept all major credit cards (Visa, MasterCard, American Express, and Discover). We also accept wire transfers and PayPal. Checks will only be accepted from customers in the USA. For large orders from repeat customers, terms may be granted pending qualification.

How will shipped to me?
   We generally ship via FedEx, UPS, DHL, and USPS, and we are more than happy to use your preferred carrier or account. We do ship to international (non-USA) customers, as well.

What is the estimated lead time ?
   The primary factor in lead time for the MODEL is availability. If we do not currently have the MODEL in our inventory, we will check with our trusted suppliers for stock. Services such as repair or refurbishment could affect lead time, as well.

Good Service in WTL:  

> We offer high quality, fast delivery, competitive price for Mitsubishi Servo Motor and Servo Drive.

> Please send your RFQ to get the latest price.

> Normally, we will ship the items in 1-2 weeks after receive the payment.

> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.

> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate.

If needed, please contact us for specific prices.