|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
IC693PRG300 2 LINE / 16 CHARACTERS DISPLAY 42 KEYS CONFIGURE PLC
AND I/O PARAMETERS
Product information GE IC693PRG300:
The IC693PRG300 module is a GE Fanuc handheld programming device.
It is part of Series 90-30. The main function of this device is to
monitor logical operations, and to configure and debug issues in
the application programs.
It is a PLC device that can modify the I/O parameters. It can be
connected to a CPU by using its serial port. A 15-pin D-type
connector is present in the device that connects with the CPU
serial port.
The IC693PRG300 module uses the statement list language. The
handheld programming device or HHP device does not require any
communication parameter configuration in order to communicate with
a PLC. The front part of the HHP has a keypad with 42 keys that are
arranged in a matrix format that measures 6 keys across by 7 keys
down.
The keypad offers tactile feedback and it is easy to use. An LCD
screen is also present along with the keypad and the screen can
display 2 lines with 16 characters of information at a time.
Note:
The user logic program in Series 90-30 CPU numbers 350 and above
cannot be viewed or edited with the Hand-Held Programmer. You must
use Logicmaster 90-30, Control, or VersaPro programming software
with those CPUs.
The HHP connects to the CPU serial port through a 15-pin D-type
connector on the Series 90-30 PLC power supply in the CPU
baseplate. The physical connection is through a 6-foot (2-meters)
long cable (IC693CBL303).
This cable also provides power connections to the HHP, and provides
a signal that tells the PLC that an HHP is attached. The HHP can be
connected or disconnected while the PLC is powered-up.
The HHP does not require communications parameter configuration in
order to communicate with a PLC. This makes it useful for
troubleshooting a communications problem between a PC and the PLC.
Features :
The keypad for the HHP is a sealed type with tactile feedback, and
has 42 keys, arranged in a matrix of six keys across by seven keys
down. It has a two-line by 16 character LCD display screen.
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
