Active Member
|
[China]
Address: 10/F,Jia Yue Building, Chebei Road,Tianhe district,Guangzhou,China
Contact name:Amy
Guangzhou Sande Electric Co.,Ltd. |
|
|
Geunine Fanuc Servo Amplifier I/O Module A03B-0815-C042 AC Servo Motor Driver
A03B-0815-C042 | A03B0815C042
EXPANSION MODULE E1 CONNECTOR PANEL TYPE 2
ac servo motor drive
I/O module for connection A03B-0815-COO1 01100 : 24/16 I(basic module) I/O module for connection A03B-0815-C002 DIlDO : 24/16 I(expansion module A) With MPG interface I/O module for connection A03B-0815-C003 01/00 : 24/16 I(expansion module B) Without MPG interface I/O module for connection A03B-0815-C004 DO : 16 I(expansion module C) 2A output module I/O module for connection A03B-0815-C005 Analog input module I(expansion module D) Fuse (accessory) A03B-0815-K002 1A (for basic module) 20 mm long Inter-module flat cable A03B-Q815-K100 Suitable for a module interval of 32 mm
Interface with CNC FANUC I/O Link Expandable up to 16 units or connection 1024/1024 points as CNC slaves Interface between basic module Bus connection Up to three expansion modules and expansion modules usino a flat cable connectable per basic module
Module Specifications
Name Drawinq No. Specifications Distribution I/O type-2 A03B-0815-C040 DI/00=48/32 (Basic module B1) With MPG interface Distribution I/O type-2 A03B-0815-C041 DI/00=48/32 (Basic module B2) Without MPG interface Distribution I/O type-2 A03B-0815-C042 DI/00=48/32 (Expansion module E1) Fuse (accessory) A03B-0815-K002 1 A (for basic module) Inter-module flat cable A03B-0815-K102 Cable length: 35 mm Module interval: 5 mm
| Name | Drawinq No. | Specifications |
| Distribution I/O type-2(Basic module B1) | A03B-0815-C040 | DI/00=48/32 With MPG interface |
| Distribution I/O type-2(Basic module B2) | A03B-0815-C041 | DI/00=48/32 Without MPG interface |
| Distribution I/O type-2(Expansion module E1) | A03B-0815-C042 | DI/00=48/32 |
| Fuse (accessory) | A03B-0815-K002 | 1 A (for basic module) |
| Inter-module flat cable | A03B-0815-K102 | Cable length: 35 mm Module interval: 5 mm |
Installation conditions
| Ambient temperature for the unit | Operation: O°C to 55°C Storace and transportation: -20°C to 60°C |
| Temperature change | 1.1°C/minute maximum |
| Humidity | Normal condition: 75% (relative humidity) or less, no condensation Short term (within one month): 95% or less (relative humidity), no condensation |
| Vibration | Operation : 0.5 G or less. FANUC performs evaluation test under the following conditions: 10 Hz to 58 Hz: 0.075 mm (amplitude) 58 Hz to 500 Hz: 1 G Vibration direction: X, Y, and Z Number of sweeps: 10 cycles Compliance with IEC68-2-6 Non-operation: 1.0 G or less |
| Atmosphere | Normal machining factory environment (For use in an environment with relatively high levels of dust, coolant, organic solutions, and so forth, additional measures are required.) |
| Other conditions | (1) Use each I/O module in a completely sealed cabinet. (2) For ventilation within each I/O module, allow a clearance of 40 mm or more between modules. Moreover, allow a clearance of 50 mm or more above and below each module . Never place a device that generates a large amount of heat below an I/O module. (3) When mounting I/O modules, ensure that the basic module is mounted on the left side when viewed from the flat cable. |
Why choose us?
1. Best price and large stock
2. Clients from USA, Europe, Mexico, Pakistan,Singpore, etc. purchase large quantity
3. Good service and One year warranty
4. Our company has good resources in china, and we have good partners.
5.Our company try to solve all problem for you regards product.
7.Fast response and professional answer.
8.. Welcome to contact us for cooperation!
