|
[China]
Trade Verify
Address: No. 411, Jianlin Road, Suzhou New District, Suzhou, China
Contact name:Fiona Luo
Suzhou Tongjin Precision Industry Co., Ltd |
|
Verified Suppliers
|
|
|
High Precision 50~2000mm Servo Electric Cylinder With Exclusive Software Repeatability:±0.01mm,Long Working Life
1. Product Model Definition
pictures..............................................
Example: TJER220 S800 B R 05 A M C 20 05 0 P11 O/C N/P
TJER220—Series No.
TJER190 TJER220 TJER250 | S800—Effective Stroke
TJER160:50~1500mm TJER190:50~2000mm TJER220:50~2500mm TJER250:50~3000mm |
B—Screw Type
B:Ball Screw C:Roller Screw | R—Anti-rotation
T:Without |
05—Screw Lead TJER190:10,20mm TJER220:10,20mm TJER250:10,20mm | A—Motor Mounting Type B:Parallel |
M—Cylinder Mounting Type
M1:Double side mount M2:Side turnnion mount M3:Front flange mount M4:Rear flange mount M5:Rear clevis mount M6:Rear shaft mount MX:Customized | C —Load Connection Type
C1:Male C2:Female C3:U-bolt C4:Ball head hinge CX:Customized |
20—Power
01:100W 02:200W 04:400W 08:750W 10:1000W 20:2000W 30:3000W | 05—Reduction Ratio
05:Five-to-one 10:Ten-to-one 20:Twenty-to-one |
2—Number Of Limit Switches
(Default is normally open NPN switch) | O/C—Limit Switches
O:Normally Open C:Normally Close |
N/P—Sensing Type
N:NPN P:PNP |
Mark:
1. In order to ensure the effective stroke, two ends need to be reserved 5mm space.
2. The sensor couldn’t be mounted on the same side of the motor when the motor is parallel mounted.
(1) The relationship between the motor output torque and the output
force of the electric cylinder:
F=T×η×2π×R/L
★ F: electric cylinder output force, Unit: Kn
★ T: motor output torque, Unit: Nm
★ R: Reduction ratio
★ L: Screw lead,Unit: mm
★ η: efficiency (generally the total efficiency is 85%, but the actual efficiency will chage,it is based on the actual use conditions)
(2) The electric cylinder working life
The life of the electric cylinder generally refers to the internal
use of the electric cylinder screw.It can be divided into two
parts:
1).screw fatigue life, it can be got by calculating;
The following is a calculation method of the fatigue life .
L10=(Ca/Fm)3×L
★ L10: The life of the electric cylinder,unit: Km
★ Fm: Average load of electric cylinder,unit: Kn
★ Ca: Screw nut basic dynamic load, unit: Kn
(can be detected by screw samples)
★ L: Screw lead,unit: mm
2).another life, depending on the conditions of use ( such as temperature, dust, using the type of lubrication, and periodically add frequency, etc. ).This kind of life is often drawn from the experience.
(3) The calculation of the average load
Average load means:A cube average value be calculated according to
the force,speed,time in different working areas during a working
cycle.
The change in load of the electric cylinder
As shown below:
The average load of the electric cylinder is calculated as follows:
(4)Electrical Servo Cylinder Drive Torque And Power Selection Table
| Motor connection | Parallel (belt drive) | ||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 3 | 5 | 10 | ||||||||||||||
| Screw Lead | [mm] | 10 | |||||||||||||||||
| Motor Power | [KW] | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | |||
| Motor Rated Torque | [N.M] | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | |||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | |||
| Cylinder Rated Force | [KN] | 9.25 | 14.56 | 19.84 | 13.88 | 21.84 | 29.76 | 27.75 | 43.68 | 59.52 | 46.26 | 72.8 | 99.2 | 92.51 | 145.6 | 150 | |||
| Cylinder Max. Force | [KN] | 150 | |||||||||||||||||
| Cylinder Speed | [mm/s] | 0-250 | 0-220 | 0-110 | 0-65 | 0-30 | |||||||||||||
| Motor connection | Linear (coupling direct drive) | |||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 3 | 5 | 10 | |||||||||||||||
| Screw Lead | [mm] | 10 | ||||||||||||||||||
| Motor Power | [KW] | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | |||||||
| Motor Rated Torque | [N.M] | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | |||||||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | |||||||
| Cylinder Rated Force | [KN] | 9.25 | 14.56 | 19.84 | 27.75 | 43.68 | 59.52 | 46.26 | 72.8 | 99.2 | 92.51 | 145.6 | 150 | |||||||
| Cylinder Max. Force | [KN] | 150 | ||||||||||||||||||
| Cylinder Speed | [mm/s] | 0-250 | 0-220 | 0-110 | 0-65 | 0-30 | ||||||||||||||
| Motor connection | Parallel (belt drive) | ||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 3 | 5 | 10 | ||||||||||||||
| Screw Lead | [mm] | 20 | |||||||||||||||||
| Motor Power | [KW] | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | |||
| Motor Rated Torque | [N.M] | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | |||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | |||
| Cylinder Rated Force | [KN] | 4.63 | 7.27 | 9.92 | 6.94 | 10.91 | 14.88 | 13.88 | 21.82 | 29.75 | 23.13 | 36.36 | 49.59 | 46.26 | 72.72 | 99.18 | |||
| Cylinder Max. Force | [KN] | 100 | |||||||||||||||||
| Cylinder Speed | [mm/s] | 0-250 | 0-220 | 0-110 | 0-65 | 0-30 | |||||||||||||
| Motor connection | Linear (coupling direct drive) | |||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 3 | 5 | 10 | |||||||||||||||
| Screw Lead | [mm] | 20 | ||||||||||||||||||
| Motor Power | [KW] | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | ||||
| Motor Rated Torque | [N.M] | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | ||||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | ||||
| Cylinder Rated Force | [KN] | 4.63 | 7.27 | 9.92 | 6.94 | 10.91 | 14.88 | 13.88 | 21.82 | 29.75 | 23.13 | 36.36 | 49.59 | 46.26 | 72.72 | 99.18 | ||||
| Cylinder Max. Force | [KN] | 150 | ||||||||||||||||||
| Cylinder Speed | [mm/s] | 0-250 | 0-220 | 0-110 | 0-65 | 0-30 | ||||||||||||||
★ Military equipment:radar, missile erector, armored vehicle swing platform, special equipment and other warships and aircraft hatch,opening, seat height adjustment, weapon tracking system,actuator,experimental lifting support, tank artillery high and low direction action adjustment, The push of rocket fuel, the opening of furnace door, etc.
★ Special equipment:industrial automation production line, assembly line, logistics transmission, lifting platform, offset control, valve control, coordinate manipulator, mechanical equipment CT Kama knife, food and medicine industry, CNC machine tools, industry packaging machine, Automotive electronic press, textile equipment winding machine indexing, die position control, clamping, drilling, positioning.
★ Experimental Equipment: Simulation platform, test bed, wave machine, testing equipment etc.
This type is especially suitable for :
servo pressing, motor assembly production line and you can also purchase our servo pressing software together.
pictures...................................
