GENITEC DONGGUAN CO.,LTD |
|
AOI Machine Specification
Project AOI Machine | Categories | Model |
Detecting System | Detction project | Miss parts,missing tin,short circuit,false welding,wrong parts,extremely reverse, monument,reverse type,etc. |
Detction element | The Chip element(more than 01005),IC(0.3mm)=pitch),foot FPCB components etc. | |
Checkable size | L520*W460mm | |
Optical system | Detectrion method | Template matching,luminance extraction,luminance average,brightness minimum,brightness maximum color extraction,circular detection Character detection,offset detection,angle detection,etc. |
Detecion camera | 1 set of high-definition color camera, HIKVISION or Basler (5 million pixels,Standard,Optional higher pixels) | |
light source | 1 set of RGB circular multi-angle LED light source. | |
Camera lens | 1 set of high-definition telecentric lenses, DOF: 4mm | |
Resolution | 15μm Standard(10μm,20μm Optional) | |
Slftware Function | Signal clmmunication | Provide corresponding upstream and downstream signal interface/support 4.0 networking MES system/support NGbuffer system. |
Mark point | Multiple Mark points can be set to support multiple mark points of collage and support for Bad Mark points. | |
Exension functon | CAD data function,double side automatic identification and detection,jump test,bar code automatic identification,SPC statistical function,support for ShopFloor system etc. | |
FOV | According to the degree of analysis, are respectively:42*30mm2(10μm);52*40mm2 (15μm);65*52mm2(20μm) | |
Selection | off-line system and maintenance station system | |
Industrial control host | Host | ADLINK |
CPU | i7 | |
Memory | 8-32G(Optional) | |
Mechanical hard disk | 1TB+256G SSD | |
Display | 22inch LED display | |
Mechanical System | Dimensions | L1140*W1080*H1550mm |
PCB Thickness | 0.3-8.0mm(PCB bending:≤3mm) | |
PCB element heihth | Upper 30mm Lower 30mm | |
Drive equipment | Panasonic servo motor | |
Motion system | High precision screw + linear double guide rails | |
Positioning accuraey | ≤10μm | |
Transport track | PCB standard track | |
Track height | 900±30 | |
Morving speed | Max.700mm/sec | |
Power Supply | AC220V 50HZ 1800W | |
Environmental requirements | Temperature:2~45℃, relative humidity 25%-85%(frost free) | |
Weight | 700KG |
Genitec AOI Machine Description:
To inspect defects of solder joint of plug-in components and SMT components on the bottom side
Core Advantages
·Optional three-section track design.
·High speed, high precision and low wear.
·AI algorithm. Quick location and easy programming.
·Strong inspection capability.
·Flexible combination with production line and applicable for multiple
scenarios.
·Traceable data and support SPC alarm.
·Automatic cleaning function for lens.