GENITEC DONGGUAN CO.,LTD |
|
Anode Plating 0.6MP 8mm PCB V Cut Machine With Stepper Motor
Small-Size PCBA V-Cut Machine PCB Router Machine With XINJIE PLC ZM30-A
PCB V Cut Machine Introduction
1. There is a dust collecting tray under the cutter die.
2. Microcomputer control,human-machine interface.
3. It is suitable for all PCBA with V-slot.
4. It's quick and time-saving to change products,
just need to change the cutter die.
5. A variety of security control modes:structural foolproof,light
curtain control,software control.
6. It can be connected to the assembly line to achieve
full-automatic without the need for manual placement. The splitted
PCBAs flow out through the assembly line.
7. Data monitoring system: startup time monitoring, capacity
monitoring, fault monitoring, etc.
8. PCB/FPC separation expert.Cutting thickness rang 0.4mm-3.5mm.
9. The working method: feeding by the PCBA Loader or manually to the assembly line --- sucking PCBA onto the machine platform --- the machine will split the PCBA --- after the separation is completed, the products and waste are absorbed onto the assembly line and flowed away.
PCB/FPC separation expert.Cutting thickness rang 0.4mm-3.5mm.
10. The working method: feeding by the PCBA Loader or manually to
the assembly line --- sucking PCBA onto the machine platform ---
the machine will split the PCBA --- after the separation is
completed, the products and waste are absorbed onto the assembly
line and flowed away.
PCB V Cut Machine Specifacation
Machine specifications | Machine name | PCB V-solt separator |
Model | ZM30-A | |
Dimension | 1500*800*1500mm | |
Outside | Vertical | |
Weight | 300KG | |
Color | Computer white | |
Machine Supply Requirements | Power | AC220V 1000W |
Environmental requirements | Clean and dry environment, avoiding humidity or high temperature | |
Working pressure / pipe diameter | ≥0. 6MP/8mm | |
Minimum distance between part and cutting line | ≥1.5mm | |
Max./Min. cutting length | 300mm*300mm 12mm*12mm | |
PCB Inlet adjustment | Front side fixation, rear side movement adjustment | |
Max.Components on the PCBA | PCB Max.height (Reverse side ) :20mm,Max.height (Front side) :35mm | |
Machine Software Part | PLC | XINJIE PLC |
Parameter setting | Direct input by touch screen according to the size of the V-slot | |
Storage Module | Store 50 sets of programs | |
Touch Screen | WEILUN Touch Screen | |
Fiber Optic Sensor | Omron |
Cutter | Blade | High speed steel knife imported from Japan |
Knife Angle | 10-30°(Optional) | |
Usage life | 5000000 times | |
Die precision | 0. 1mm | |
Main Control System | Cutting speed | 15s/pcs(200*150mm) standard speed 8 cuts for reference |
Stepping Motor /Server | Yamano / Panasonic | |
Guide screw | HIWIN guide screw | |
Assembly line MAX.Length and Width | 650mm*250mm(can be customized) | |
Cutting speed | 0-800mm/s | |
Pneumatic accessories | Yadek/SMC | |
Suction mechanical hand motion control mode | Stepper motor + rail + belt drive | |
Dust collection method and power | Die Lower dust collector 1500W | |
Cutting thickness | 0. 4-3. 5mm | |
Other Function | Misoperation protection | Light curtain, sensor and software triple protection |
Surface treatment of parts | Anode plating | |
Security Protection | Emergency Stop | |
Power off and air off function | Have | |
Self-detection function | Start-up time monitoring, capacity monitoring, machine failure information and automatic rejection system | |
Machine main parts | PCB Loader Machine (assembly line), Suction cup, Three-axis mobile cutting platform, Dust collector | |
Working Method | Auto mechanical hand online cutting PCB and deliver PCB | |
Application | Bidirectional V-groove for PCB board after plug-in / SMD |