Active Member
|
[China]
Address: 5th Floor, B2 Building Research Center Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, Guangdong Province.
Contact name:Violet
GENITEC DONGGUAN CO.,LTD |
|
|
Genitec We are PCB separator expert. We provide PCB depaneling total solution.
Genitec founded in Taiwan in 1993. We have two factories for over
20000 square meters.
We produce most kind of PCB separator. Including PCB router, laser
PCB separator, V-cut,
PCB/FPC punching machine.
If you have any project about PCB depaneling, welcome your inquiry,
we will provide you solution.
PCB Separator Features
1. Fully automatic PCB router machine (hereinafter referred to as
the machine),
is the company's many years of research and development,
through the actual combat verification of the success of the even plate division automatic production equipment.
2. The whole series is equipped with CCD automatic optical
counterpoint system,
which greatly improves cutting accuracy and operation efficiency.
3. Use a high-speed spindle to make the cutting board of PCB board.
It has small stress, high precision and suitable for PCB board of any shape.
4. Double mesa motion, which can simultaneously perform split board
cutting
and PCB board placement to improve operation efficiency.
5. The design of dust collecting iron net barrier prevents the abnormal loss of PCB board.
6. Patent high-efficiency dust collecting device, low noise, high
efficiency, easy maintenance and cleanliness.
7. Windows operation system is safe, stable, easy to learn and easy
to use.
PCB Separator Specification
| Model | GAM300 |
| Effective Cutting Size | X350*Y400mm |
| Cutting function | Line, circle and arc. |
| Processing surface | Double worktable |
| Machine repeated accuracy | ±0.01mm |
| Cutting precision | ±0.02mm |
| Maximum moving speed | XY 1000mm/s,Z 800mm/s |
| Maximum Move Trip | X:750 Y:500 Z:100mm |
| Main speed | RASEM 60,000rpm adjustable |
| Cutting speed | 0~100mm/s |
| Operation Interface | Windows operating system |
| Programmatic teaching methods | Color CCD image instruction input |
| Program Backup | USB |
| Control mode | PC Visual Precision 4-Axis Control System |
| XYZ demotion method | AC Servo motor |
| Size of appropriate knife | Ø0.8~3.0mm |
| Electricity | AC220V/380V 50/60HZ three-phase |
| Cutting host size | 1200(W)*1050(D)*1700(H)mm |
| Cutting host weight | 560Kg |
| Set machine power | 2.2KW/3HP |
| Set Machine Size | 860(W)*470(D)*730(H)mm |
| Collector weight | 50Kg |
| Collection method | Upper Collection |
PCB Separator Attention
1. Technical personnel should be sure to close the power supply when they are repaired.
When the power supply is opened, a special person should be assigned to guard against unrelated injuries
caused by unrelated personnel touching the operation button or switch.
2. When the following situations occur, the power supply should be
shut down immediately and
professional maintenance technicians should be informed of the situation so as to facilitate the maintenance work.
(1) The power line or joint is worn and worn.
(2) Any liquid inflows into or contact the electrical Zero component.
(3) Although the operation is carried out according to the instruction manual, the machine is still not functioning properly.
(4) The machine has shown obvious changes in performance.
3. Firmly install the machine while installing, and delineate the dangerous area to prevent the unrelated
personnel from getting in and out, so as to ensure the safety of the operation.
4. If it is found that the water around or around the machine is
damp or more watertight, do not send electricity before removing
moisture (gas).
