SKP25.003E2 Infrared Flame Sensor Explosion Proof With Optical
Elements
working principle
After the modulated pulse generated by the oscillating circuit
passes through the reflection circuit, the digital integration
photoelectric switch or RC integration method is used to eliminate
interference, and finally the driver is triggered (or not delayed)
to output the photoelectric switch control signal.
Using optical elements, the light beam is changed in the middle of
the propagation medium; the light beam is used to reflect the
object; and the light beam is returned after a long distance. The
photoelectric switch is composed of three parts: transmitter,
receiver and detection circuit. The emitter is aimed at the target
to emit a light beam. The emitted light beam generally comes from a
light emitting diode (LED) and a laser diode. The beam is emitted
uninterrupted, or the pulse width is changed. The radiation
intensity of the pulse-modulated beam is selected multiple times
during the launch, and it runs indirectly toward the target. The
receiver consists of photodiode or phototransistor. In front of the
receiver, optical components such as lenses and apertures are
installed. Behind it is the detection circuit, which can filter out
the valid signal and apply the signal.