Active Member
|
[China]
Address: Jinjiang District, Chengdu, Sichuan 610000, China
Contact name:Plato Wang
Supanchor Rock Reinforcement Co., Ltd. |
|
|
TR Thread Boreholes Rock Anchor Bar Self Drilling Anchor System TR38/660
Features
TROPE TM Drilling hollow bars is an unique anchoring system and is today’s answer to the increasing demands of the tunnelling industry and ground engineering for safer and faster production.
The relative rib area of the TITAN thread is very high; it lies close to the optimum value of fR = 0.21 - fR = 0.33 and is therefore many times higher than the relative rib area of ribbed reinforcing bars (fR = 0.056). In addition to the good bond, the rib surfaces at an angle of 45° reduce the splitting forces. The crack widths at maximum load lie below the 0.1 mm stipulated for verification of permanent corrosion pro_x0002_tection. Such a crack width cannot be achieved by drilling rods with rope threads, e.g. R32 or R38 (to ISO 10208 and ISO 1720).
Technical Data
T-ROPE Bar
| Weight kg/m | UL / YL kN | E - A 200mm ASTM 370 | Ather Bar Type | UL / YL kN | TR |
| TR32/360 | 3.4 | 360 / 280 | ≥ 6% | R32N/19 | 280 / 230 | √ |
| R32S/15 | ||||||
| 360 / 280 | ||||||
| √ | ||||||
| X | ||||||
| 320 / 260 | ||||||
| T30/11 | ||||||
| TR38/660 | 6.0 | 660 / 525 | ≥ 6% | R38N/19 | 500 / 400 | √ |
| T40/20 | 540 / 430 | X | ||||
| T40/16 | 660 / 525 | X | ||||
| TR51/930 | 8.4 | 930 / 730 | ≥ 6% | R51N/33 | 800 / 630 | √ |
| T52/26 | 929 / 730 | X | ||||
| TR64/1200 | 13.3 | 1200 / 1000 | ≥ 6% | T64/1200 | 1200 / 950 | √ |
| 1160 / 970 | ||||||
| T73/53 | X | |||||
| T76/1200 | ||||||
| 1200 / 1000 | X | |||||
| TR76/1900 | 19.7 | 1900 / 1500 | ≥ 6% | T76S | 1900 / 1500 | √ |
| T73/35 | 1875 / 1430 | X |
| TROPE TM thread Hollow Bars | |
| * Type of steel | 40Cr (ASTM A29/A29M-05) |
| * Elongation | A200mm 6% - 10%(according to standard ASTM 370) |
* Options of Anti-corrosion | ￭ Hot-dipped Galvanization ￭ Epoxy Coating |
| Drill rig Models | TE160HT / TE260HT / TE360 / TE760 / TE1000c |
Accessories
| Bar Type | Nut | Coupler | ||||
| Dome Nut | HEX Nut | Da x L ( in/mm) | lbs/kg | |||
SW x d x L ( in/mm ) | lbs/kg | SW x L ( in/mm ) | lbs/kg | |||
| TR32S/17 | 1.81x2.36x2.56 1.81x2.36x2.56 | 0.77 | 1.81x2.56 | 0.77 | 1.65x7.48 | 2.11 |
| R38N/19 | 1.96x2.36x2.36 | 1.1 | 1.96x2.36 | 1.1 | 2.04x8.66 | 3.96 |
| R51N/31 | 2.95x3.54 x2.75 | 3.3 | 2.95x2.75 | 3.3 | 2.48x7.87 | 4.2 |
| T64/1200 | 85x109x70 | 1.4 | 85X70 | 1.9 | 76X160 | 1.9 |
| T76N/51 | 3.93x3.14 | 5.86 | 3.74x7.87 | 9.47 | ||
Job sites 
cc
SubNumbers
10 Years - The average seniority > 10 years, which is not common in anchor manufacturing industry.
20 Years - 20 years of exporting experience, familiar with different product standards from different
customers and countries.
26 Years - 26 years of exploration and development, SupAnchor has become the No.1 SDA bar
manufacturer in Asia.
60 Countries - customers from 60 countries. Our self drilling anchor systems have been used by
customers from 50 countries all over the world, including America, Chile, Germany,
Australia India, etc.
1,500 Projects - SupAnchor’s products have been widely used in over 1500 massive projects.
has its own quality tracking systems. Every batch of anchor bar has
its unique batch
