Active Member
|
[China]
Address: NO.334-1,XiangshanRoad,Luotian community,Songgang Town, Bao'an District, Shenzhen,China. 518105
Contact name:catherine
Shenzhen Kerun Optoelectronics Inc. |
|
|
Customize one digit 7 segment led display for home appliance
Product features
1) Low consumption ,working under low voltage and current .
2) High brightness ,short response time, high frequency.
3) Small size, lightweight, easy soldered ,great Impact resistance.
4) Solid state encapsulation, good stability .
5) Long life ,more than 50,000 hours .
6) Great display effect ,big viewing angle
Customization available.
Various types based on digit quantity (OEM &ODM available)
| Types | Type 1 | Type 2 | Type 3 | Type 4 |
| Digit quantity | 1 digit | 2 digits | 3 digits | 4 digits |
Different size for 1 digit 7 segment led display (OEM&ODM available)
| digit height | PIN quantity | common joint | Display size | |
| 1 | 0.28inches | 8pins | 1 | 7.40*10.00*6.00mm |
| 2 | 0.30inches | 10pins | 1 6 | 7.60*12.70*7.0mm |
| 3 | 0.32inches | 10pins | 9 7 | 7.00*11.00*5.00mm |
| 4 | 0.36inches | 10pins | 1 6 | 7.50*14.00*8.50mm |
| 5 | 0.39inches | 12pins | 1 6 | 10.00*13.00*7.00mm |
| 6 | 0.40inches | 14pins | 3 14 | 9.80*18.70*5.10mm |
| 7 | 0.43inches | 10pins | 3 14 | 11.00*18.80*6.50mm |
| 8 | 0.50inches | 10pins | 3 8 | 12.70*19.00*8.00mm |
| 9 | 0.52inches | 10pins | 3 8 | 12.60*17.50*7.00mm |
| 1 0 | 0.56inches | 10pins | 3 8 | 12.60*19.00*8.00mm |
| 1 1 | 0.60inches | 10pins | 3 8 | 18.00*25.00*8.30mm |
| 1 2 | 0.80inches | 10pins | 3 8 | 20.00*27.70*10.00mm |
| 1 3 | 1.00inches | 10pins | 3 8 | 24.00*34.00*10.50mm |
| 1 4 | 1.20inches | 10pins | 1 5 | 28.80*40.80*8.00mm |
| 1 5 | 1.50inches | 10pins | 1 5 | 30.60*44.00*8.00mm |
| 1 6 | 1.80inches | 10pins | 1 5 | 38.00*56.00*11.00mm |
| 1 7 | 2.30inches | 10pins | 1 5 | 47.80*69.70*12.00mm |
| 1 8 | 3.00inches | 10pins | 3 8 | 65.00*85.50*12.00mm |
| 1 9 | 4.00inches | 10pins | 1 8 | 90.00*122.00*15.00mm |
| 2 0 | 5.00inches | 10pins | 3 8 | 105.00*140.00*16.00mm |
QC&QA
- Three times of inspection on all products on production:
Step 1；raw material check
Step 2: process check and full inspection after chip&wire bonding
Step 3: full test before packing and partial check before shipment
Application:
FAQ
Q1: Can I get a sample order?
A1: Yes, we welcome sample order to test and check quality.Mixed samples are acceptable.
Q2: How long to get a sample and the lead time for mass production?
A2: Normall samples lead time is 3~5 days; mass production lead time is 15~30 working days.
Q3: How to proceed the order if I have logo to print?
A3: First, Artwork for visual confirmation, and next is Sample picture or sending sample to you for confirmation, finally we will go to mass production.
Q4: Do you offer guarantee for the products?
A4: Yes, we offer one year guarantee for the products.
