Socket welding wrought gate valve for heavy oils & light grease transfer PN16 Mpa PN80 Mpa DN10 - DN25

Socket welding wrought gate valve for heavy oils & light grease transfer PN16 Mpa PN80 Mpa DN10 - DN25

Specifications

• Material of construction: 1Cr18Ni9Ti , SS304 , 316, 316L , 12Cr1Mov , TA2 , F55 , C-276 , F51
• End Port connection: Socket welding wrought
• Sizes: DN5 mm to DN25 mm
• Pressure grade: PN1.6 Mpa - PN6.4Mpa , PN16 Mpa , PN80 Mpa
• Temperature range: -20 ℃ to 440 ℃  / -190 ℃ to 240 ℃ , 540℃ , 570℃
• Applications:  any corrossive or non-corrosive liquid fluid
• Standards: ANSI/AWWA/ASTM/ANSI

Description

The gate valve is also known by other names, such as knife valve, slide valve, stop valve, or block valve, since its primary purpose is to stop the flow. The valve has become an important piece of fluid control equipment for more than 150 years. The gate valve has become a one-stop solution for fluid control call with relatively little basic design change.

Gate valves are useful in applications involving slurries. This is because their “gates” can move right through the slurry. 

Materials used:

• Gun Metal
• Cast Steel
• Stainless Steel
• Cast Iron
• Alloy Steel
• Brass
• Bronze
• Aluminum
• Zirconium etc.

Use of gate valves:

• heavy oils
• varnish
• light grease
• steam
• oil
• gas
• natural gas
• honey
• molasses
• cream non-flammable viscous liquids
• high pressure, high temperature steam applications

Industrial Applications

• chemical plant
• refinery
• pipeline industry
• salt working pipelines
• power industry and any other
• industrial facility in the world

Competitive advantage

• AutoCAD is used to design products and optimize structures

• Cast Process Design by by Castsoft CAD and CAE

• Strict Manufacturing Process control

• Quality Control Of The Casting Material

• Metal Material Laboratory for test of compositional, metallographic & mechanical property