Active Member
|
[China]
Address: No.53 HuFan Lane, No.9088, HuTai Rd, Shanghai
Contact name:xie
Shanghai Schneider-Sunshine Mechanical Group Co.,Ltd. |
|
|
250RD Adsorption Compressed Air Dryer Heatless Regenerative Desiccant Compressed
⊙ Working Principle of Adsorption Dryer
A large number of air compressor from the
inflow of imported diameter, through air control valve: the two
entered a drying tower in the bottom, when the air flow to the
tower, one of the Humidity will be by suction alumina desiccant
stem. So, it will enable the discharge of the air compressor dew
point temperature dropped to -40℃,and reached a dehumidification
effect. The entire system takes 10 minutes. The entire circulatory
system is as follows: When a tower in the desiccant or operation of
five minutes, while the other tower is renewable and clean only 4.5
minutes, continued pressure only 30 seconds, so the two towers
interactive operation of such duplication. When the machine was
operating renewable wind of 12 percent. Superior design, saving
maintenance costs.
⊙ Adsorption dryer configuration schematics
⊙ High efficiency heat exchanger
➤ Adopting high strength thick copper pipe and oxygen-free welding
with quotient silver content electrode; long service life and high
heat transfer efficiency.
➤ Adopting anaerobic welding method, the system is free of
impurities and keeps the system clean. The whole series of copper
tubes are manufactured by mechanical expansion, which are closely
combined with fins, with low heat transfer impedance and high heat
transfer efficiency.
➤ The coil is cleaned by sound wave and there is no residual oil. It
is not easy for eel slices to stick dust, and no carbonization
occurs during welding.
➤ Adopt the anaerobic welding method to ensure the cleanliness of
the system.
⊙ Adsorption Dryers Compressor Specification
| Models | 5RD | 10RD | 20RD | 30RD | 50RD | 75RD | 100RD | |
| Air Capacity | Nm³/min | 0.8 | 1.35 | 2.6 | 3.6 | 6.9 | 10.7 | 14.4 |
| SCFM | 28 | 47 | 91 | 127 | 243 | 377 | 508 | |
| Suitable for air compressor | 5 | 10 | 20 | 30 | 50 | 75 | 100 | |
| Air inlet or outlet | 1/2″ | 3/4″ | 1″ | 1″ | 1½″ | 1½″ | 2″ | |
| Dimension | L (cm) | 60 | 94 | 102 | 107 | 112 | 117 | 122 |
| W (cm) | 40 | 50 | 60 | 60 | 70 | 70 | 70 | |
| H (cm) | 186 | 178 | 191 | 186 | 214 | 214 | 212 | |
| Total Weight (Kg) | 90 | 120 | 190 | 247 | 420 | 429 | 569 | |
| Models | 150RD | 200RD | 250RD | 300RD | 400RD | 500RD | 600RD | 700RD | |
| Air Capacity | Nm³/min | 21.4 | 28.4 | 34.5 | 42.7 | 59.5 | 70.8 | 79.3 | 106.2 |
| SCFM | 755 | 1006 | 1207 | 1507 | 2106 | 2506 | 2807 | 3759 | |
| Suitable for air compressor | 150 | 200 | 250 | 300 | 400 | 500 | 600 | 700 | |
| Air inlet or outlet | 2″ | 3″ | 3″ | 4″ | 4″ | 5″ | 5″ | 6″ | |
| Dimension | L (cm) | 122 | 180 | 180 | 204 | 234 | 234 | 244 | 296 |
| W (cm) | 70 | 80 | 80 | 80 | 90 | 90 | 95 | 100 | |
| H (cm) | 240 | 225 | 255 | 243 | 228 | 253 | 253 | 268 | |
| Total Weight (Kg) | 804 | 1024 | 1218 | 1413 | 2040 | 2405 | 2658 | 3550 | |
The biggest usage condition:A.Entrance
temperature 40℃ B.The air pressure 10Kg/cm³; Rebirth breeze
quantity 12%;
Girculation time be 5 minutes; Time of rebirth
is 4.5minutes;
Continous press time for 0.5 minutes; The
atmospheric pressure of the dewdrop temperature 40℃; The power
supply is 10 Ф 220V 50 Hz/60Hz.
⊙ Combined dryer
| SAD-600 Combined Compressed Air Dryer Processing air quantity:79.3 Nm³/min Work pressure :7 Kg/cm³ (MAX 10Kg/cm³) Compressor horsepower: 15 HP Air inlet and outlet caliber: 6″ Power supply: 3Ф 220V / 3Ф 380V Cooling water volume: 225 L/min Dimension: 280cm×140cm×180cm | SAD-600 Combined Compressed Air Dryer Processing air quantity: 169.7 Nm³/min Work pressure : 7 Kg/cm³ (MAX 10Kg/cm³) Compressor horsepower: 30 HP Air inlet and outlet caliber: 8″ Power supply: 3Ф 220V / 3Ф 380V Cooling water volume: 450 L/min Dimension: 350cm×170cm×225cm |
Characteristics:
1. High efficiency,energy-saving
2. Pressure dew point:-20~-40°C
3. Purge air≤1.5%
4. Reliable valve to ensure the completion of all the
procedures,pro-long the lives of other parts
5. High performance of the activated alumina,it is
equality,intensity,good dew point and less dus to emerge,long using
life.
6. Unique pipeline design,it’s ensuring the equal distribution of
purge air.
7. Three stages draining system
8. Low pressure loss
