PANTON Color Thermoset Powder Epoxy Polyester Resin For Outdoor Architecture

Matt Powder Coating for outdoor Architecture Aluminum profile

This series of products is one kind of thermoset powder coating made of polyesterresins and acrylic resins.

Advantage:

---Gloss can be 2-5%(60°),which is please to eyes

---Good flowing, good appearance with smooth surface

---Suitable for long-term outdoor use

---Good adhesion and impact resistance

---Good over baking resistance

---Low cost and reasonable price

Property:

Density: 1.4~1.8g/cm3(Owing to the different formula and different colors)

Particle size:

Different purposes varies, the standard for the average particle size is 35 ~ 40um,smaller than 10um< 10%, greater than 100um < 0.5%

Storage stability:

Durable Matt Powder Coatings should be stored below 30°C in a dry and well ventilated place away from source of heat and direct sunlight. If stored in an air-conditioner room, in order to avoid damp again, before using the powder, the powder should be kept at the room temperature or at the same temperature with the spray equipment. Under such condition, the powder can be stored stably for 6 months. Extended, retest will be required. If the testing result meets the requirement, the powder can still be used.

Film Characteristics:

Spraying:

This series product is suitable for the following spraying methods: corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed thermal spraying and other spraying methods(For the last 3 methods, please requested in advance)

Film thickness:40~150μm, theoretically 50~80μm.

Curing guide: 200°C/10min or customizing design,for example 180℃/15min