Active Member
|
[China]
Address: No.99 Tong Xi Road, Caijia Town, Beibei District, Chongqing，China
Contact name:Wu
Chongqing Silian Optoelectronic Science & Technology Co., Ltd. |
|
|
GB15K150-XX LED explosion-proof flood light Used in chemical plants
The floodlight is a point light source that can illuminate uniformly in all directions. Its illumination range can be adjusted arbitrarily, and it appears as a regular octahedron icon in the scene. In the past, floodlights were the most widely used light source in the production of renderings. Standard floodlights were used to illuminate the entire scene. In the era of low-carbon lighting, LED explosion-proof floodlights are used more and more. Multiple LED explosion-proof floodlights can be used in the scene to produce better results.
| Model No. | GB15K150-XX | GB18K180-XX | GB20K200-XX |
| Rated Power(W) | 150 | 180 | 200 |
| Rated Lumen(lm) | 15750 | 18900 | 21000 |
| Overall Dimension(mm) | Φ320×300 | Φ320×300 | Φ320×300 |
| Weight(kg) | 7.5 | 7.5 | 7.5 |
| Explosion-proof Class | Exd IIC T6 Gb Ext DAZ1 IP65 T80℃ |
| Input Voltage(V) | AC100~277 |
| Frequency (Hz) | 47~63 |
| Operating Ambient Temperature (℃) | -20~40 |
| IP Level | IP66 |
Applicable place
Mainly suitable for use in flammable and explosive places such as drilling platforms, offshore oil platforms, oil refineries, chemical plants, tunnels, oil stations, oil depots, ships, etc.; suitable for explosive gas environments in Zone 1 and Zone 2 and various indoor and outdoor operations and constructions Fixed lighting on site.
1. Regularly eliminate dust and dirt on the shell of explosion-proof lamps, and improve the light efficiency and heat dissipation performance of the lamps. The cleaning method can be sprayed with water (above the shade on the lamp) or wiped with a damp cloth according to the protective ability of the lamp housing. When cleaning with water spray, the power supply should be cut off, and it is strictly forbidden to wipe the plastic shell (transparent part) of the lamp with a dry cloth to prevent static electricity.
2. Check whether the transparent parts have been impacted by foreign objects, whether the protective net is loose, desoldering, corrosion, etc. If so, stop using it and repair and replace it in time.
