Results forsandpaper abrasion test apparatusfrom 5170 Products.
|
IEC60695-11-5 Table Type Needle Flame Tester for Assessing the Internal Fault Conditions Caused By Small Flame Product Description According to IEC60695-2-2 and IEC60695-11-5 ...
|
|
|
|
IEC 60335-1 Automatic Cord Reels Endurance Tester Standard: Clause 22.16 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements. ...
|
|
|
|
IEC 60884 Testing Equipment Insulating Sleeves Of Plug Pins Abrasion Test Apparatus with 9mm Stroke Standard of Apparatus for abrasion test on insulating sleeves of plug pins: IEC ...
|
|
|
|
Electric Wire Abrasion Test Apparatus Product information: This device conforms to the standard requirement of IEC245-4. It is used for the abrasion test of the rubber insulated ...
|
|
|
|
IEC60884 Clause 24.7 Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Of IEC Testing Equipment Standard: IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9 ...
|
|
|
|
IEC 60884-1 Plug Socket Tester, Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Standard of Plug Socket Tester: IEC 60884-1 'Plugs and socket-outlets for household and ...
|
|
|
|
Products Introduction: This apparatus conforms to IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.3 ...
|
|
|
|
48rpm Label Marking Abrasion Test Machine 220VAC 50Hz Markings Durability Tester Abrasion Test Machine Description: This testing apparatus is design and manufactured according to ...
|
|
|
|
IEC60730-1 IEC Test Equipment Label Marking Abrasion Test Machine Sliding Weight 500g Production introduction: This testing apparatus is design and manufactured according to ...
|
|
|
|
UL 498 SD8.2-8.3 Mechanical Drop Test Apparatus Plug Drop Resistance Test Apparatus Product Information: The apparatus is complied with UL 498 SD8.2-8.3 item, applied to check the ...
|
|
|
|
Household Appliance 7 Inch Fire Hazard Needle-Flame Test Apparatus IEC 60695-11-5 Product information: We have a series of fire hazard testing apparatus, such as needle-flame test ...
|
|
|
|
IEC 60335-2-24 Clause 21.101 Impact Testing Machine Refrigeration Apparatus Drop Test Apparatus Product information The test machine complies with IEC 60335-2-24 Clause 21.101. ...
|
|
|
|
IEC60065:2014 clause 12.1.2 Audio, Video and Similar Electronic Apparatus Drop Test Apparatus EID-3 Product information: The test machine complies with IEC60065:2014 clause 12.1.2...
|
|
|
|
IEC 60811-2-1 Mineral Oil Immersion Test Apparatus Products Introduction This apparatus conforms to IEC 60811-2-1, IEC 60811-404. It is suitable for oil resistance test of enameled ...
|
|
|
|
Mechanical Material IEC Test Equipment Pressure Indentation Test Apparatus Product details: The high temperature pressure testing apparatus is used to test the heat resistance of ...
|
|
|
|
IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine Product details: This testing machine is also called the test apparatus for checking damage ...
|
|
|
|
90J IEC60068-2-75 Impact Testing Machine Pendulum Swinging Hammer Test Apparatus Product information: The test apparatus is designed and manufactured according to the requirements ...
|
|
|
|
IEC60068-2-75 up to 50J Impact Testing Machine-Pendulum Hammer Test Apparatus With 1000mm Rigid Arm IEC60068-2-75 Clause 4.2: The test apparatus consists basically of a pendulum ...
|
|
|
|
IEC 60068-2-75 Test EHA Pendulum Hammer Test Apparatus With 10kg Mounting Support IEC60884-1 Clause 24.1 The specimens are checked by applying blows by means of the pendulum hammer ...
|
|
|
|
Automatic IEC Test Equipment Power Cord Flexing Test Apparatus of Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it ...
|
|
|
You may also be interested in :