Active Member
|
[China]
Address: No.7,shihuan road, sangyuan industrial district, Donguan city,Guangdong province, China
Contact name:Michael Lu
Dongguan Bai-tong Hardware Machinery Factory |
|
|
Reinforced Fibre Glass Body Manual Wet Sandblast Cabinet For
Jewelry Surface Treatment
Model:9065W
Technical specifications;
Manual wet sandblasting
Suction type sandblasting
Fibre glass body, light and long life use, optional stainless steel
body
Dimension of machine: 1050X750X1750mm
Dimension of work cabinet: 900*600*550mm
Motor for pump: 220V, 50Hz, 1100W, optional 380V, 50Hz, 1100W
PU pump system
Pedal switch
Lighting inside cabinet: 220V, 50Hz, 13w
One sandblasting gun, with 8*20*60mm boron carbide nozzle
One pc water cleaning gun
Fan exhaustor fan for water fog, 220V, 50Hz, 38W, 2pcs
Interlock switch on side door--when door is opened, sandblasting
stop to protect operator
Abrasive media used: glass beads, brown aluminum oxide, white
aluminum oxide,etc
Compressed air needed: pressure 2-7bar, air flows 0.8-1.5 m3/min
Wet Sandblaster Series(Fibre Glass Body):
| model | dimension of cabinet(mm) | quantity of gun | raw material of cabinet | remarks |
| 6868W | 680X680X600 | 1pc | fibre glass | optional s/s body |
| 9065W | 900X650X600 | 1pc | fibre glass | optional s/s body |
| 9090W | 900X900X700 | 1pc | fibre glass | optional s/s body |
| 1212W | 1200X1200X800 | 1pc | fibre glass | optional s/s body |
1. Pretreatment: Electroplating, spray paint, spray, etc. All are
covered sandblasting before machining, surface is absolutely clean,
at the same time greatly improve the coating adhesion and corrosion
resistance ability.
2. Clean up: Casting parts, stamping parts, welding parts, such as
metal artifacts to scale, residue, dirt; Cleaning the surface of
non-metallic products, ceramic embryo dark spots on the surface of
the clear lacquer and reduction pattern, etc.
3. Old refurbished: Automobile, motorcycle, mechanical and
electrical equipment and clean all moving parts. At the same time,
eliminate fatigue stress, prolong service life.
4. Finishing: All metal and non-metal products (plastic, crystal,
glass, etc.) can eliminate surface, dumb matte processing, make the
product surface level.
5. Mold processing: Mold surface and matte treatment, graphic
production, as well as mold cleaning, do not hurt and die surface,
ensure accuracy of mould.
6. Burrs treatment: Small burr removal machining parts, plastic
injection parts glue burrs.
7. Bad product rework: Bad product coating removal, remove bad
surface coloring and printing.
8. Enhance the hardness on the surface of the metal, eliminate
stress, such as the plane leaves, spring, mechanical cutters and
weapons and other surface treatment.
9. Etching antiskid processing: Etching pattern in the surface of
metal products and non-metallic products, words and antiskid
processing, such as marble, handle non-slip, seal, stone lettering,
etc.
10. The processing of jeans: Jeans sanding, pale and cat must
effect is achieved.
