|
[China]
Trade Verify
Address: 99#, Qianluo Road, Qianqiao Town, Wuxi City, China
Contact name:Stacy
WUXI JINQIU MACHINERY CO.,LTD. |
|
Verified Suppliers
|
|
|
domestic appliance 2 in 1 0.3-3.2 mm coil uncoiling and straightening
Model:
GL series
Usage range:
Design for 0.3-3.2 mm thickness sheet thickness coil
uncoiler & straightener for domestic appliance
suitable material is stainless steel, copper, aluminum....
Advantages:
characteristic:
1. The machine combines the material uncoiler with leveler. It
has a unique cylinder type press, worm and worm type leveling
regulation method. It is suitable for the 0.3-3.2mm material
uncoiling and precise leveling
2, material uncoiler frame: material support tile plate
adopts three leaf design, tile plate radian and material roll
inside diameter coincide, tile board surface by Seiko, quenching
and tempering treatment, smooth and wear-resistant,
during useing, it will not damage the material. The
material A type block adopts quick change
structure, quick replacement and firm, does not damage the tile.
3, leveling rollers: 7pcs (top 3/, 4 arrangement), the lower roller
4 with drive function. It adopts high strength rolling
bearing, steel bar quenching and tempering, high frequency
quenching, surface chromium plating and grinding. Surface hardness
up to HRC60-62 degrees. The utility model has the advantages of
high steel, strength and wear resistance, high leveling accuracy,
no friction on the surface of the material, and no scratching of
the material.
4, feeding roller parts: feeding roller using pneumatic
compression device, can produce enough tensile force, the material
to the leveling roller, and is synchronous rotation. The same is
made of high strength rolling bearing steel, hardened and plated by
grinding. It has the same strength, steel and abrasion resistance
as the leveling roll.
5, leveling adjustment part: fine tuning parts using worm gear
fine-tuning device. High accuracy, high pressure and easy
operation.
Electronic control part: a simple handle type control mode, easy to
machine operation.
Speed control: frequency conversion speed control, it is difficult
to shake and deform in the process of material operation, and
ensure the requirement of high precision leveling.
2 in 1 Machine Models:
| Model | GL-200 | GL-300 | GL-400 | GL-500 | GL-600 |
| Coil width[mm] | 200 | 300 | 400 | 500 | 600 |
| Coil thickness[mm] | 0.3 ～ 3.2 | ||||
| Feeding speed[m/min] | 0 ～ 15 | ||||
| Straightening roller [mm] | ￠54×7 pcs(up 3/ bottom 4) | ||||
| Driving roller for material inlet and outlet | Material inlet 2 pcs outlet 2 pcs | ||||
| Uncoiler frame loading capacity [kg] | 600 | 1000 | 1500 | 2000 | 2000 |
| Coil inner diameter[mm] | ￠460 ～ 520 | ||||
| Coil outer diameter[mm] | 1000 | 1200 | 1200 | 1200 | 1200 |
| Motor [hp] | 1 | 2 | 2 | 3 | 3 |
| Expension mode | Manual type | ||||
