Active Member
|
[China]
Address: Room 601, Building 1, No. 69 Yuanfeng Road, Baoshan District, Shanghai 200444, China
Contact name:George
Shanghai Saintenna Wireless Technology Co., Ltd. |
|
|
Toy quality 4G full band PCB internal antenna with Ipex connector
Specification:
| Product Name | 2.4GHz wifi receiver antenna/ 5GHz wifi receiver antenna/ 2.4G 5G dual band PCB antenna |
| Frequency Range | 2.4~2.5GHz/ 4.9~5.9GHz/ 2.4~2.5GHz 4.9~5.9GHz dual band |
| S.W.R | <1.5 |
| Gain | 3dBi~5dBi |
| Connector | SMA M/F, RP SMA, UFL, IPEX |
| Impedance | 50Ohm |
| Environmental Standard | ROHS, REACH |
Reliability test:
| Project | Test condition | Result |
| Storage environment | Temperature, humidity, air pressure test are as follows: | Normal electrical and mechanical properties |
| High and low temperature test | The 5 cycle is between 70℃ and 40℃. Then check the appearance quality | Meet the mechanical and electrical properties |
| Resistance to constant damp heat test | Humidity 95+3%, temperature: 40 degrees celsius. Continuous 2H | Meet the mechanical and electrical properties |
| Vibration test | Vibration frequency 10-55HZ, displacement: 0.35MM, acceleration: 50.0M/S, Frequency sweep frequency: 30 times | Normal electrical and mechanical properties |
| Drop test | 1m height drop | Normal electrical and mechanical properties |
| Drawing force test | Push pull tester to test the strength of the instrument:≥10N | Normal electrical and mechanical properties |
| Voltage resistance | 1. Insulation spark voltage 1.5KV | Normal electrical and mechanical properties |
