Upgrade Wide Type Nylon Body Safety Padlock Steel Shackle Safety Loto Lock Lockout

Upgrade Wide Type 38mm Steel Nylon Shackle Safety Loto Lock Lockout Padlock

Part No.: WCP38S

Safety padlock

a) Made of copper cylinder and key.More resistantant to corrosion and rust.Very stable,with more then 1 million times operating.

b) Reinforced nylon body, withstand temperature from -20℃ to +80℃. The steel shackle is chrome plated; the non-conductive shackle is made from nylon, withstand temperature from -20℃ to +120℃, ensuring the strength and deformation fracture not easily.

c) Key Retaining Feature: When the shackle is open, the key can’t be removed.

d) Laser printing and logo engraving available if required.

e) All different colors available.

1.16 "mechanical injury accident

Accident occurrence and rescue situation

At about 8 o 'clock on January 16, 2017, in the second workshop of Shanghai jiafang steel pipe group taicang co., LTD., located in taicang port district, the head of the maintenance team, xu jiacai, lay on the ground under an electric rail flat car on the south span of the workshop to carry out maintenance work on the flat car. At this time, workshop worker wang siqing (male, 50 years old, anhui chaohu people) use the operating handle to move pingche ready to load, pingche movement caused xu jiacai was crushed and injured, then xu jiacai was sent to taicang people's hospital rescue, after the rescue failed at 9:49 on the same day.

Cause analysis and nature of the accident

Enquiry information to relevant personnel: on January 16, 2017 at 8, Shanghai jia square pipe group co., LTD., taicang stitching worker Sun Yun read two workshop (male, 43, shandong junan county) south across the workshop electric rail flat wagon fault condition of oral told the maintenance team leader Xu Gucai, then two people left. Around 8 o 'clock, xu jiacai lay on the ground under the flat car for maintenance. There were no warning signs and power supply was cut off, and no other personnel monitored the site. < / p > < p > at this time, the second workshop worker wang siqing did not know that someone below the flat car maintenance, did not make a careful check to confirm the safety conditions of the flat car operation, the operation control handle to move the flat car to the east, the flat car to move a few seconds forward about 3 meters, flat car squeezed in the lower part of the maintenance operation xu jiacai.

Scene investigation: the electric rail flat car is located on the west side of the south span of the second workshop, parked on the track laid in the east and west direction. The lower part is equipped with 4 pulleys. The platform of the flat car is 6 meters long and 2.98 meters wide.

After consulting relevant safety management system and safety operation rules of Shanghai jiafang steel tube group taicang co., LTD., the company stipulated that maintenance personnel should hang warning signs and warn operators not to take warning signs at will when dealing with equipment faults.

Immediate causes of the accident:

Xu jiacai did not set up safety warning signs and cut off the power supply and other effective safety measures during the maintenance operation; The direct cause of the accident is that wang siqing did not confirm the safety condition of the flat car, that is, the moving flat car.

Indirect cause of accident

1. Shanghai jiafang steel tube group taicang co., LTD. And its main persons-in-charge failed to earnestly perform the duties of production safety management, failed to effectively supervise and inspect the work safety of the unit, and failed to timely eliminate the hidden dangers of production safety accidents.

2. Shanghai jiafang steel tube group taicang co., ltd. failed to provide xu jiacai, sun yunnian and wang siqing with written safety production education and training on "equipment inspection and maintenance safety management system", "equipment maintenance personnel safety operation rules" and relevant safety operation rules, and there is no relevant training record.

3. Shanghai jiafang steel tube group taicang co., ltd. failed to effectively urge employees to implement its own safety rules and regulations and safe operation procedures, which resulted in employees violating the company's rules and operating procedures in the equipment maintenance approval process and the actual maintenance process, resulting in potential safety accidents.

Analysis of accident liability and Suggestions on dealing with the persons responsible and the units responsible

1. Xu jiacai failed to carry out maintenance operations in accordance with the safety operation rules for equipment maintenance personnel formulated by the company, violated the safety operation rules, and was directly responsible for the accident. In view of the death of xu jiacai, exempt from the relevant responsibility.

2. Shanghai jiafang steel tube group taicang co., ltd. failed to educate and train employees on the job-related safety production rules and regulations and safe operation rules, and failed to urge employees to strictly implement the safety production rules and regulations and safe operation rules of the company, which is the responsible party for the accident. It is suggested that taicang safety supervision bureau should impose administrative penalty on Shanghai jiafang steel pipe group taicang co., LTD in accordance with the safety production law of the People's Republic of China.

3. Song jian, general manager of Shanghai jiafang steel pipe group taicang co., LTD., failed to earnestly perform the duty of production safety, failing to timely supervise and urge the inspection, find and eliminate hidden dangers of production safety accidents. It is suggested that taicang safety supervision bureau should impose administrative penalty on song jian in accordance with the relevant provisions of the law of the People's Republic of China on work safety.

4. The supervisory organ shall monitor the law enforcement, integrity and efficiency of the members of the accident investigation team during the investigation, and find no violation of administrative discipline; It will also investigate the performance of the local supervision department's work safety "with the party and government, one post and two duties". Once the violation of administrative discipline is found, it will be dealt with in accordance with the law.

5. Wang siqing started the flat car without fully confirming whether the surrounding environment of the flat car was safe, and he was responsible for the accident. It is suggested that the public security organs investigate and deal with it according to law.

6. Require the trade union of the enterprise to do a good job in the supervision and inspection of labor protection, and do a good job in the popularization of safety education for employees.

7. After the accident, Shanghai jiafang steel tube group taicang co., ltd. has been ordered to suspend production immediately, handle the accident properly in accordance with the principle of "no mercy", and report the handling to the accident investigation team for the record.