Home Companies Jianglang Technology Co. Ltd.

1" PTFE Air Diaphragm Pump For Powder Pneumatic To Move Bulk Solid

Contact Us

[China]

Trade Verify

Address: No 350 East Nanyanggang Road , Shanyang Town ,Jinshan District ，Shanghai China

Contact name:Sky

Jianglang Technology Co. Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

1" PTFE Air Diaphragm Pump For Powder Pneumatic To Move Bulk Solid

Country/Region	china
City & Province	shanghai shanghai
Categories	Pumps

Product Details

1 inch Specifically Designed Powder Pneumatic Diaphragm Pump To Move Bulk Solid

Principles of Operation For Powder Pneumatic Diaphragm Pump

Powder pumps were specifically designed to move bulk solids more effectively throughout your process. They are a cost e effective replacement for augers and conveyors and eliminate and labor intensive means of moving bulk powders. THese heavy duty pumps consistently transfer fine-grained, low bulk density, dry powders in a dust-free operation.

Conveying distance depends upon the micron size and the bulk density of the powder.
Powder must be 150 mesh (106 micron) or smaller size particle / powder and dry. The powder pneumatic diaphragm pump will not pump crystals or flakes and the bulk density should be less than 50lbs / cubic feet. The higher the bulk density, the shorter the conveying distance and the lower the flow rate.
The powder pneumatic diaphragm pump can be located a maximum of 15 feet above powder source.

PARAMETER

Place of Origin	Shanghai, China
Power Source	Pneumtic
Max. Flow Rate	0.8 m³/h
Power Driven	Compressed air
Max Permitted Grain	0.8 g/cm³
Particles	.≤10%
Air Inlet Size	1/2 in.npt(f)
Wetted End	Aluminum
Fluid Inlet Size	1 in.
Fluid Outlet Size	1 in.

Packing & Shipping:

WORKING PRINCIPLE

Each operation chambers had been adopted with two single direction ball valves, since the simultaneous operation of the diaphragms change the volume of the operation chambers from time 3 to time, in this case, two single direction ball valves had been turned on and switched off one by one over and over again forcing the continuously absorbance and draining off of the liquid. One hole had been designed in the entrance position of the discharge port for the reasons of the convenience of the smooth transportation of the materials.

FAQ

Q1. Can I have a sample order for powder pneumatic diaphragm pump?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.

Q3. Do you have any MOQ limit for powder pneumatic diaphragm order?
A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for powder pneumatic diaphragm pump?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.