Active Member
|
[China]
Address: HUANGDAO CITY ,QINGDAO ,SHANDONG PROVINCE,CHINA
Contact name:SUZEN
QINGDAO SHENGHUALONG RUBBER MACHINERY CO.,LTD |
|
|
rubber shredder machine rubber powder line waste tire recycling line
1.wire drawing machine
Hard alloy is welded on the cutting blade to make it rigid and
wearable.
The machine is equipped with safety shelves to effectively prevent
unsafe issues from occurring in the process of tire bead peeling
off The motor, the speed reducer and the main frame are all
compactly structured together as one body.The base of the machine
is a complete cast framework,which is convenient for installation.
APPLICATION:
The machine is applicable for taking off steel rings from tire
beads.
Technical data
| Model | 1200Y |
| Motor Power (kw) | 7.5 |
| Overall Dimensions (L×W×H) | 4700×900×1700 |
| Weight (T) | 2.8 |
| Capacity (tires/h) | 80-100 |
Rubber powder production line Instruction
Working flow:
Waste tire---Wire drawing machine---tire cutter--Rubber shredder--- Steel wire separating machine---magnetic separating ---Rubber powder
--fiber seperator.
1. Steel wire drawing machine--extract the thick steel wire.
2.tire cutter--cut the big tires into three parts
3. Conveyor-Transport the tire to the shredder.
4. Twin-shaft shredder--Shears the tire into 5- 10cm blocks;
5. Recirculation system--To control the size of shreds going to the rapers;
6. Raspers-Reduce the shreds into 15. 20mm chips and liberates steel from the rubber;
7. Over belt magnet--Separation of liberated steel from the rubber chips;
8. Vibratory feeder--Transports the rubber chips;
9. Rubber granulator machine--Size reduction of the chips to 1-4mm granules and liberates the textile fraction to air flow separation.
10. Grinder machine --Grinder rubber powder.
11.Central de-dusting unit--Remove dust and fines from the system and filter the air before returning it to the atmosphere.
2.QDJ-1200 Tyre Cutting Machine
. Specifications
1.1 Overall size(L×W×H): 2080×1000×2130mm
1.2 Qty. of cutter: 4pieces
1.3 Cutter stroke: nearly 600mm
1.4 Cylinder pressure: nearly 12T
1.5 Working oil pressure: 6.3Mpa
1.6 Oil pump: Flow 40 L/mi, pressure 6.3Mpa
1.7 Working oil grade: No. 32 mechanical oil
1.8 Motor model: Y132M2-6, power: 7.5---11kW
3.rubber shredder machine
Characteristic
This machine has the compact structure,advanced technology,low
power consumption,high efficiency,crushing room with off structure
,easy to maintenance,etc.The machine,adopting excellent hard alloy
steel as it blade,high hard and wearable,is druable;Circle mesh
screen has gridding structure,dropping pieces with large area,is
good for rubber pieces.
| Type | LP-1200 |
| Quantity of cutter head | 20 |
| Dimension of cutter head (diameter*thickness)mm | 560*60 |
| Size of charge-in(mm) | 1200 |
| Size of charge-out(mm) | 50-60 |
| Handling Capacity (t/h) | 3000 |
| Motor Power (kw) | 60*2 |
| Dimension(m) | 6×2.8×3.7 |
| Weight (T) | 16 |
4 .Rubber Crusher: This is waste tire recycling main machine
| Type | XKP-560 |
| Front roll diameter (mm) | 510 |
| Rear roll diameter (mm) | 560 Groove roller |
| Working length of rolls (mm) | 800 |
| Front roll surface speed (m/min) | 25.56 |
| Friction ratio | 1:1.30 |
| Max. nip (mm) | 15 |
| Motor power (KW) | 110 |
| Size (L*W*H) (mm) | 5064*2284*1978 |
5. Rubber Granulator Production Line
6.fiber seperator
Main technical specifications
1). Impeller: The diameter of the fan blade is φ1100 mm, and the number is 8 pieces.
2). Wheel shell size: the equipment body part is φ1600 mm, and the total height of the equipment is about 3400 mm.
3). Spindle speed: 377 (and 464) rpm.
4). Main motor: JQ2-52-6 5.5kw 760rpm.
5). Feeder revolutions: 29 revolutions per minute.
6). Feeder motor: JW092—4 0.4 kW 1370 rpm
