Active Member
|
[China]
Address: Wangtai zone, Jiaonan District, Qingdao City, Shandong Province, China.
Contact name:Sophie
Qingdao Honghesheng Industry Co., Ltd. |
|
Tire Retreading Process Flow
Tire Casings Collection→Initial Inspection→Old Tread Buffing→Section Repair & Skiving→Cementing & Filling →Cushion Gum→Building Tread Rubber→Ventilating Cloth→Enveloping System→Rims Mounting System→Test Envelope & Inner Tube→Curing Chamber System→Demounting Curing Rims→Undress Envelope→Final Inspection & Test →Finishing Paint→Retreaded Tire in Storage
We can make different numbers tire retread machine. Just tell me what capacity you need ,we'll recommend.
Related Tire Retreading Machines
Weight:200 Kgs
Power:1.5Kw,380V,50Hz
Dimension: 1100x750x850 mm
Every single tire casing will receive a thorough inspection identifying potential defects.Using multiple methods to inspect tires for defects and ensure only high quality casings to be retreaded.If repairs are needed, they are administered after inspection.
Standard Size: 15'',16'',20'',22.5''
Motor Power: 16Kw
Dimension:1600x1800x2100 mm
The tire’s old tread is mechanically removed on high speed
buffers.HHS buffers are extremely accurate and will remove the
proper amount of old rubber while turning the tire to an exact
specified diameter and radius.
Rubber Dust Collector
Motor Power: 3 Kw
Weight: 220 Kgs
Dimension: 1600X780X2000 mm
Electricity:380V,50Hz,3 Ph
Usage Description:Collecting Rubber Crumbs which buffed off old tread by Buffing Machine
Power: 0.18 Kw
With advances in state-of-the-art repair materials and repair
methods, many of these tyres can be routinely repaired and in most
cases can be retreaded when the original tread is worn off. The
repair station is where any surface injury is treated using
effective material and tools for grinding and patching.
Even in small injuries it is critical that the injury is cleaned and filled. If this is not done, severe rust, separation and steel cable looseness could take tyre out of service. The injury should be inspected, and then cleaned out with a carbide cutter. After cementing the injury, a vulcanizing rubber stem should be applied to “fill” the injury. This would create a permanent repair that maximizes tyre life.
Usage Description: Engineered with explosion-proof motor,Cement Mixing Tank stir industrial solvent and rubber materials evenly to guarantee the procedure of cement spraying.
In the Pre-cure Tire Retreading System, the Tread Rubber has already been vulcanized with the new tread pattern design. The buffed tire needs a thin layer of cushion gum to be wrapped around its crown area. The Pre-cured Tread Rubber(PTR) is then applied with the building machine. This is called Building Process.
Dimension: 4000x1600x2100 mm
Description:
The monorail & hooks system increase productivity by reducing chances of casing contamination and allows for faster loading and unloading of tires.This increases your work place safety and productivity.
Curing Chamber
Dimension: 5500x2100x2350 mm
Heating Power:60 Kw
Usage:The Tires are then placed in Curing Chamber and the pre-cured tread becomes adhered to the tyre through a vulcanizing process.
About shipment
Since the price of raw materials will fluctuate in different
periods, the online price is a reference price, not the final
price.
We can guarantee the same quality and the lowest price among our
peers. If you are interested in our products, please feel free to
contact us, we will give you a real-time quotation A.S.A.P.
Pre-Sales Service
* Inquiry and consulting support.
* Communicating and drawing making.
* Test machine before delivery.
* Training how to install the machine, training how to use the machine.
* Engineers available to service machinery overseas.
* Video Call Support Online
1. Q: How does your factory control quality?
A: Quality is priority. Quality Department will make a strick inspection before the machines leave the factory.
2. Q: Are the techncal parameter is fixed?
A: Basically, each model is corresponding to a related machine. But we can design different type machine according to the client’s requirement.
3. Q: How to send your enquiry? Kindly tell me the answer...
-1) How many tires do you retread each time?
-2) What's the main size?
-3) Do you use or sell? What's your probable budget?
-4) Leave me your WhatsApp,Skype or WeChat.
