500LPH One Stage RO Water Treatment System Pure Water Reverse
Osmosis System
Product Introduction of RO Water Treatment System
When a pressure greater than the osmotic pressure is applied to the
brine side of the membrane, the direction of water flow is
reversed, and the water in the brine flows into the freshwater
side, a phenomenon called reverse osmosis (reverse osmosis,
abbreviated as RO). It is pretreated first and then treated with
RO. Through these treatments, 99% of dissolved salts and harmful
substances such as particles, colloids, organic impurities, heavy
metal ions, bacteria, viruses and heat sources can be removed. The
desalination rate of the system reaches 96-98%, and the
conductivity of the effluent is ≤ 10μ S/cm.
The Basic Working Principle of RO Water Treatment System
After a special high-pressure pump, when the raw water is added to
a pressure of 6-20 kg, the raw water permeates through the reverse
osmosis membrane with a pore size of only 0.0001 microns under the
action of pressure. Chemical ions, bacteria, fungi, and virions
cannot pass through, and are discharged with wastewater. Only water
molecules and solvents with a volume of less than 0.0001 microns
are allowed to pass through.
Technical Specifications of RO Water Treatment System
500LPH Reverse Osmosis System |
Model | JFRO-500L |
Host Size | 800x600x1600mm (can be customized) |
Power | 1.5KW |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Operating Pressure | 0.8-1.2MPa |
Recovery Rate | 50% |
Designed Water Inlet | 1000L/h |
Outlet Flow | 500L/h |
Desalination Rate | ≥99.5% |
RO Frame | SUS304 |
Membrane Size | 4040 |
Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
Number of Membranes | 2 |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP (Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | SS/FRP (Optional) |
Pipe Material | U-PVC, Stainless steel (Optional) |
Application fields of RO water treatment system
Water treatment system treat raw water in several procedures in
order to meet the bottled drinking water standard.
This system uses water pressure pump to increase the water supply
pressure; sand filter is used to remove Plankton, Moss, Suspension,
Colloid and so on. Active carbon filter is used to remove strange
smell, chlorine, chloride, organic matter and heavy mental, lower
color and optimize water quality. Sodium softer is used to remove
the calcium and magnesium ions in water. Micro filter is used to
remove the tiny impurity. Hollow fiber Ultra filter can remove
impurity, colloid, phenolic compounds, chloride, germ and all the
harmful substance, meanwhile keep all beneficial minerals in water.
Reverse osmosis can move all the things in the water and to make
raw water to be pure water.
Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter
(quartz sand filter) → Activated carbon filter → Soft water
processor → Precision filter → High pressure pump → Primary reverse
osmosis (RO) device → Purified water tank → High pressure pump →
Two Stage reverse osmosis → ultraviolet sterilization device →
water point.
![](http://img.everychina.com/nimg/00/78/3e96339024a8178606bdec37eebe.jpg)
Photos of reverse osmosis water treatment system
![](http://img.everychina.com/nimg/f2/3c/d2f38870a3b0bf14920eb3b6add8.jpg)
![](http://img.everychina.com/nimg/5a/a6/8476fb97416d761ff80efe4705c1.jpg)
![](http://img.everychina.com/nimg/ab/34/485573e9e78137bbf098382ec073.jpg)
![](http://img.everychina.com/nimg/03/90/3c13f2d498ebf8c76504f239c63e.jpg)
![](http://img.everychina.com/nimg/e9/f7/0d541fac103ba79e999663351781.jpg)
![](http://img.everychina.com/nimg/6b/df/c4a091f48e7bc28d6ef9f42aa02a.jpg)
![](http://img.everychina.com/nimg/da/95/b276defeb502fb55fbfbc818c747.jpg)
![](http://img.everychina.com/nimg/d3/20/d68875d71566606d0c7a3eba30b2.jpg)
FAQ:
1. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and
softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean
source, etc.