Jufu Water Technology Co., Ltd |
|
Reverse Osmosis System Ro Water System RO Equipment Industrial Ro
Plant
Product Introduction of RO Water Treatment System
The reverse osmosis system is an important part of the pure water
production device. In order to ensure the long-term stability of
the reverse osmosis system, it is necessary to carry out
pretreatment for different influent water quality to avoid
pollution or blockage of the reverse osmosis system due to poor
water quality.
For the reverse osmosis system, the incoming water is customarily
divided into groundwater, tap water, surface water, seawater, waste
water (reclaimed water), etc. These water bodies are affected by
various factors, different geographical conditions, and different
seasonal climates lead to the characteristics and characteristics
of the water body. The impurities it contains are different, so the
reverse osmosis pretreatment process will also be different.
The Basic Working Principle of RO Water Treatment System
After a special high-pressure pump, when the raw water is added to
a pressure of 6-20 kg, the raw water permeates through the reverse
osmosis membrane with a pore size of only 0.0001 microns under the
action of pressure. Chemical ions, bacteria, fungi, and virions
cannot pass through, and are discharged with wastewater. Only water
molecules and solvents with a volume of less than 0.0001 microns
are allowed to pass through.
Technical Specifications of RO Water Treatment System
1000LPH Reverse Osmosis System | |
Model | JFRO-1000L |
Host Size | 1000x600x1600mm (can be customized) |
Power | 2.2KW |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Operating Pressure | 0.8-1.2MPa |
Recovery Rate | 50% |
Designed Water Inlet | 2000L/h |
Outlet Flow | 1000L/h |
Desalination Rate | ≥99.5% |
RO Frame | SUS304 |
Membrane Size | 4040 |
Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
Number of Membranes | 4 |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP (Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | SS/FRP (Optional) |
Pipe Material | U-PVC, Stainless steel (Optional) |
Advantages of RO water treatment system:
Reverse osmosis equipment belongs to physical desalting method,
which has many advantages.
1) Non-phase-change physical method was used to desalinate and
purify the saline water under norma temperature.
2) Desalting rate of single membrane element is 99.3% and can
remove colloid, organics, bacteria, virus and all kinds of heavy
metals in water at the same time.
3) With water pressure as the driving force, energy consumption is
the lowest among many treatment methods.
4) No need for large amount of chemical treatment, no elimination
of chemical waste liquid, no environmental pollution, and the
recovery rate is over 70%.
5) High automation program, automatic stop in case of ailure, with
automatic protection function.
6) The system is simple, easy to operate, and the water quality is
stable.
7) Equipment covers small area, compact structure, reliable
operation and high water quality.
Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter
(quartz sand filter) → Activated carbon filter → Soft water
processor → Precision filter → High pressure pump → Primary reverse
osmosis (RO) device → Purified water tank → High pressure pump →
Two Stage reverse osmosis → ultraviolet sterilization device →
water point.
Photos of Reverse Osmosis Water Treatment System
FAQ:
1. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and
softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean
source, etc.