Active Member
|
[China]
Address: Address: 1floor, C building, Indstrial 3 Road No.38, Jiahe Wanggang, Baiyun District,GuangZhou, China.
Contact name:Andrea Xu
Guangzhou Kai Yuan Water Treatment Equipment Co., Ltd. |
|
|
500LPH UV Sterilizer RO System Water Purifier Plant Reverse Osmosis Water Machine
Parameter
Model: KYRO-500L
Influent index: Municipal tap water
Water production index:Conductivity ≤ 5us/cm ( resistivity ≥
0.2MΩ.CM ), in line with the Pharmacopoeia 2015 standard
Recovery rate: 70% of first stage, 80% of two stage
Working time: can run 24 hours a day
Inlet water temperature: 5°C-39°C
Introduction to medical equipment purified water equipment
The second-stage reverse osmosis purified water equipment adopts the purified water treatment technology widely used today. The pre-treatment combined with the + reverse osmosis system can effectively remove the salt and impurities in the water, which is the standard of purified water and has advanced technology.
The production water quality is stable, easy to operate, and easy to maintain. It can be used in the medical device industry, meets the requirements of the 2015 Chinese Pharmacopoeia, meets the requirements of the US and European Pharmacopoeia, and can pass the GMP standard and FDA certification; the system adopts the automatic control mode, the mobile computer can be remotely monitored and controlled in real time, and the operation fault can be automatically notified.
It runs and provides alarm information, and the operation is safe, stable and reliable. It is the preferred configuration mode for purified water equipment in the pharmaceutical production
and pharmaceutical industries.
Process
Raw water tank(buyer supply)→ raw water pump→quartz sand filter →activated carbon filter→security filter→1st high pressure pump→1st ro membrane→2rd high pressure pump→2rd ro membrane→pure water tank+UV sterilizer(ozone generator)→pure water tank(buyer supply) +water supply point
1. The reverse osmosis forward water temperature is about 25 ± 2
°C.
2. Reverse osmosis system includes: security filter, high pressure
pump, reverse osmosis membrane group, control instrument, etc.
3. The water treatment system of this project is based on the RO
desalination system. The quartz filter, activated carbon filter and
security filter are pre-processed to ensure the normal operation of
the ro system.
4. Process characteristics: Compared with traditional ion exchange
demineralization, reverse osmosis desalination has the advantages
of long-term stable operation, high reliability, high processing
precision, long operating cycle and low operating cost.
Pipeline system
| 1. The connection parts of the purified water system are preferably welded, and the second is connected to prevent the use of wire connection. |
| 2. The whole system adopts one-side welding two-side forming process, and the water quality is divided into different grades. It is manual welding and automatic welding process. It is automatically welded in contact with purified water. After welding, it is purified and provided with internal speculative photos and attached with inspection report |
| 3. Filters, pressure gauges, conductivity probes, RO membrane shells, and UV rays that are in contact with product water are hygienic grade clamp connections |
| 4. The pipeline with purified water and contact meets the requirements of CMP3D, the pad is PTPE, the diaphragm valve is installed at 45 degrees horizontally, the circulation pipeline installation is set to 0.5 slope, and the lower point is the discharge point. |
| 5. Set sampling points for each pressure section to facilitate water quality testing |
Water treatment accessroies^^
1. Panel flowmeter | 2. Manual control vlave | 3. Pressure guage |
1. Lingxiao raw water pump | 2. Connecting pipe fittings | 3. UV sterilizer |
Product Tag: RO Water Treatment System, Brackish Water System
