|
[China]
Trade Verify
Address: No.69 Xijiu Road, Industrial Park for Environmental SCI & TECH, Yixing, Jiangsu,China
Contact name:Iris Xu
B-Tohin Machine (Jiangsu) Co., Ltd. |
|
Verified Suppliers
|
|
|
1.5-22kw Three Lobe Roots Blower Compressor Roots Vacuum Pump BC6005
About BC Three Lobes Roots Blower
BC series roots blower, with the intergral structure of impeller
and shaft, has a waide application in environmental protection,
electric power, architecture, gas supply and etc.
Main Chrarcteristics:
1) Working smoothly as helical timing gears is adopted.
2) It is flexible mounting ways because of the same structure in
inlet and outlet.
3) It adopts more reasonable bearing structure, which can incresase
the bearing operation life.
4) It is low noise, vibration and energy consumption.
Specifications:
| Model | BC6005 |
| Air capacity | 3.73m3/Min-12.36m3/Min |
| Discharge differential pressure | 10-80KPA |
| Rotary speed | 850rpm-1800rpm |
| Motor type | 1.5KW-22KW 380/400/415/440V, 3PHASES, 50/60HZ |
| Motor brand | Standard: Siemens Beide or Wannan motor Siemens and ABB motor for your option |
| Installation type | Standard: horizontal type. Vertical type available for your option |
| N.W. of blower without motor | 275 kg |
| Packing size Approx. | 1.50*1.05*1.75m (length*width*height) |
| Features | 1. Helical type timing gears for smooth operation 2. Compact, flexibility in installation gives users more choices. 3. Integral structure of impeller and shaft avoiding shortcomings of the split structure blower 4. Adopt imported oil seals made from fluoric rubber with perfect wear resistance and high-temperature resistance. 5. Low noise, low vibration and energy consumption. |
Parameter
| Type | Port Dia | Speed | Inlet airflow(m3/min)and shaft power(KW)at different conditions | |||||||||||||||
| 10kpa | 20kpa | 30kpa | 40kpa | 50kpa | 60kpa | 70kpa | 80kpa | |||||||||||
| rpm | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | m3/min | KW | ||
| BC6005 | 80(3'') | 850 | 5.27 | 1.66 | 4.82 | 2.95 | 4.49 | 3.90 | 4.20 | 4.87 | 3.95 | 6.00 | 3.73 | 7.13 | ||||
| 1000 | 6.39 | 1.95 | 5.94 | 3.47 | 5.61 | 4.59 | 5.32 | 5.73 | 5.07 | 7.06 | 4.85 | 8.39 | 4.63 | 9.45 | 4.44 | 10.73 | ||
| 1150 | 7.51 | 2.24 | 7.06 | 3.99 | 6.73 | 5.28 | 6.44 | 6.59 | 6.19 | 8.12 | 5.97 | 9.65 | 5.75 | 10.87 | 5.56 | 12.32 | ||
| 1250 | 8.26 | 2.44 | 7.81 | 4.34 | 7.47 | 5.74 | 7.18 | 7.16 | 6.94 | 8.82 | 6.71 | 10.49 | 6.50 | 11.82 | 6.31 | 13.41 | ||
| 1400 | 9.37 | 2.73 | 8.93 | 4.86 | 8.59 | 6.43 | 8.30 | 8.02 | 8.05 | 9.88 | 7.83 | 11.74 | 7.61 | 13.24 | 7.43 | 15.02 | ||
| 1500 | 10.12 | 2.92 | 9.67 | 5.21 | 9.34 | 6.89 | 9.05 | 8.60 | 8.80 | 10.59 | 8.58 | 12.58 | 8.36 | 14.18 | 8.17 | 16.09 | ||
| 1650 | 11.24 | 3.22 | 10.79 | 5.73 | 10.46 | 7.58 | 10.16 | 9.46 | 9.92 | 11.65 | 9.69 | 13.84 | 9.48 | 15.60 | 9.29 | 17.70 | ||
| 1800 | 12.36 | 3.51 | 11.91 | 6.25 | 11.57 | 8.27 | 11.28 | 10.32 | 11.04 | 12.71 | 10.81 | 15.10 | 10.60 | 17.02 | 10.41 | 19.31 | ||
Features:
1. Helical type timing gears for smooth operation
2. Compact, flexibility in installation gives users more choices.
3. Integral structure of impeller superior to split structure, more
stable in power transmission
4. Adopt imported oil seals made from fluoro rubber, which is of
great wear resistance and high-temperature resistance.
5. Small vibration and economical energy consumption.
Working Principle
Roots blower is a cubage blower, and it discharges a fixed amount
of air in proportion to its rotation speed. Every rotation, there
is two lobes to finish three times absorbing and dischargeing air.
Compared with two lobes blower, it is of less air pulses, smaller
load change, higher strength, lower noise and vibration.
Two paraller shafts have three lobes each, all the lobes keep small
clearance with each other and housing inside. Every lobes
rotatiomn, a certain air will be absorbed at inlet and transfeered
form the housing inside surface to blower's diacharge port.
Two shafts will be turned by the timing gears, no any touching
between lobes, so it can be turned at high speed without any
lubrication inside. It has the following chaaracteristics: simply
configuration; running smoothly;good performance stabilization. It
has been widely applied in various industries.
Standard supply of scope
1. bare shaft blower
2. pressure relieve valve
3. wafer check valve (slim type)
4. inlet silencer(with air filter)
5. outlet silencer
6. public base (with belt cover)
7. rubber flexible joint and shock pad
8. motor pulley
9. pressure meter
10. V-belt
11. bolts and nuts and other connection parts
12. electric motor
FAQ
1. What's the information should I provide when inquiry?
A: Air capacity
B: Pressure
C: Application
D: Use environment(Temperature, atmospheric pressure)
E: Do you need motor?
Or other specials you give us will be more appreciated.
2. What is your warranty?
Our warranty is 12 months after received the roots blower. During
the warranty period, replace the damaged parts for free of charge.
Out warranty period, to provide timely, high-quality technical
services and price concessions spare parts to ensure continuous
safe and high-quality equipment operation.
3. How long is the service life of roots blower?
In normal use environment
A- Service life of blower is more than 10 years.
B- Service life of Impeller is more than 60, 000 hours.
C- Service life of bearing is more than 50, 000 hours.
D- Service life of gear is more than 60, 000 hours.
4. What is your terms of packing?
A: Generally, we pack our goods in Fumigation Free Plywood Case. If
you have legally registered patent, we can pack the goods in your
branded boxes after getting your authorization letters.
5. How does your factory control product quality?
We have quality inspection department. Before sending out product,
we check each product. If there is quality problem, we will produce
new one.
6. What are your terms of payment?
1. TT 30% AS THE ADVANCE PAYMENT AND TT 70% AFTER INSPECTION BEFORE
SHIPPING.
2.100% IRREVOCABLE L/C AT STGHT.
