Galvanized Sheet Metal Roll Forming Machines , Standing Seam Metal Roof Machine

Seam lock roll former, galvanized sheets roll forming machine, 71 - 478

Quick Detail:

1. Thickness : 0.4-0.8mm
2. Material : GI/Alu-zinc/ Aluminum/PPGL
3. Input width : 600mm
4. Effective width: 478mm
5. Material weight : 3MT
6. Coil ID : 510mm
7. Driven way: by 7.5Kw driven motor
8. Cutting way: by 4.0Kw hydraulic cutting device
9. Cutting tolerance : ±1mm

Application:

The standing seam roof panels have a concealed fixing or seaming method by turning up the edges of two adjacent panels, and then folding or interlocking them. In this way, the seaming or fixing parts are invisible, and therefore sometimes we called the panels concealed fixing panels! The machine got its name as concealed fixing standing seam roll forming machine accordingly! Also, the standing seam roof panel system has hidden fasteners, so the machine has another name joint-hidden or fastener-hidden roll forming machine.

Machine list:

1. 3T*600mm hydraulic un-coiler
2. Polythene film device as request
3. Roll former
4. Hydraulic cutting device
5. Run out table
6. PLC control systems

Description/Technical Parameter details of complete line:

• 3TX600mm Hydraulic Un-Coiler

Expansion system controlled by hydraulic group

Link-connect expanding system

Pump power=1.5KW

Load capacity=3 Ton

Coil Inner – diameter =451-530 mm

Coil outer-diameter=Max. 1500 mm

Coiler Width=Max. 600 mm

• Polythene film on device before feed in
• Entry Roller & Manual Pre-shearing device (Un-powered)

Smart cut control,

To cut off the end of the final piece of sheet only

Working thickness: max. 0.8mm

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack 4 meter long, rolled type

Profile Drawing/Layout/Equipment reference pictures: