PLC Control Standing Seam Roll Forming Machine Klik Panel With Notching

Metal sheets roofing making machine, roll former, Klik panel with notching, standing seam panel

Quick Detail:

1. Thickness : 0.4-0.8mm
2. Material : GI/Alu-zinc/ Aluminum/PPGL
3. Input width : 610mm
4. Effective width: 485mm
5. Material weight : 3MT
6. Coil inner diameter : 508mm
7. Driven way: by 7.5Kw driven motor
8. Cutting way: by 4.0Kw hydraulic cutting device
9. Cutting tolerance : ±1mm

Application:

Compared to a regular roof panel roll forming machine, a standing seam roll forming machine has smaller sizes in body but more sophisticated rolling tools.

Standing Seam Metal Roofing is a fully interlocking roof system. Its unique design mechanical-lock design forms a weather-tight unit, and unlike some other types of panel metal roofs, no rivets or screws are exposed on the surface of the panels. It may be installed on new construction or applied over existing roofs. All trims and caps are designed to ensure an integrated weather-proof roof.

Machine list:

1. 3T*600mm hydraulic un-coiler
2. Polythene film device as request
3. Roll former
4. Hydraulic cutting device
5. Run out table
6. PLC control systems

Description/Technical Parameter details of complete line:

• 3TX600mm Hydraulic Un-Coiler

Hydraulic system for expansion coil-inner-hole with 4 palms

Link-connect expanding system

Pump power=1.5KW

Frequency Inverter to regulate turning speed: Motor: 2.2KW

Load capacity=3 Ton;

Coil Inner – diameter =451-530 mm

Coil outer-diameter=Max. 1500 mm

Coiler Width=Max. 600 mm

Driving motor to turn the coil

• Polythene film on device before feed in
• Entry Roller & Manual Pre-shearing device (Un-powered)

Smart cut control,

To cut off the end of the final piece of sheet only

Working thickness: max. 0.8mm

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack 4 meter long, rolled type

Profile Drawing/Layout/Equipment reference pictures: