Hebei Huayang Welding Mesh Machine Co., Ltd. |
|
1. Product description
Automatic wire diameter 5mm diamond mesh wire making machine is
used for making wire mesh. Line wires (also called long wires)
are laid out on a pattern board to set the panel width spacing.
Cross wires are fed into a hopper, and are programmed to be dropped
one at a time onto the line wires. Then, the cross wires are
resistance welded into place setting the panel length spacing. The
panel advances after the weld and the process starts over again.
2. Technical parameter
Model | HY-DHW-1500 | HY-DHW-2000 | HY-DHW-2500 | HY-DHW-2800 | HY-DHW-3300 |
Weld width(mm) | 1500 | 2000 | 2500 | 2800 | 3300 |
Meshi trip(mm) | Single trip 3000 and no limit on return | ||||
Std trans.spacing | >=25mm-stepless adjustable | ||||
Std long.spacing | >=50mm, and progressive increase by 50 | >=100mm, and increase by 100 | |||
Std weld spots | 31 | 41 | 51 | 27 | 32 |
Wire diameter(mm) | 3.0-6.0 | 3.0-6.0 | 3.0-6.0 | 5.0-12.0 | 5.0-12.0 |
Weld speed(times/min | 50-70 | 40-60 | 40-60 | 40-60 | 40-60 |
Trans material | Straight bar/rod | Straight bar | |||
Long material | Straight bar/rod | ||||
Control mode | PLC programming servo motor stepper | ||||
Mesh diagonal error | <=2 | ||||
Mesh overall error | <=2 | ||||
Air pressure | >=0.7 | ||||
Weld material | Cold drawn wire, galvanized wire, cold rolled ribbed steel |
3. Application area
The automatic wire diameter 5mm diamond mesh wire making
machine can be suitable for interior decoration, arts and
crafts, anticorrosion, poultry breeding and other industries.
4. Advantages
a. Electrodes with cooling water, good for wire 3-8mm.
b. With our company's patented threading device, artificial
threading more convenient, save time and effort.
c. The greatest advantage is possible to adjust the distance
of line wires at random on the same mesh panel.
d. This machine is compact in structure, easily to operate and
with fully functions. It has lower cost, high efficiency, reliable
working, low energy consumption advantages.
e. Welding part can easily switch, which greatly improves the
service life of machinery, maximum reduce the cost.