Active Member
|
[China]
Address: Mold city, development zone,Huanghua city,061000, Hebei Province, China
Contact name:Sales manager
Hebei Huayang Welding Mesh Machine Co., Ltd. |
|
|
1. Product description
Automatic PLC touch screen CNC spot welding machine is used
for making panel mesh. The reinforced mesh machine type 11 is
equipment for welding fence mesh and mine timbering mesh. Both the
line wire and cross wire are fed from pre-cut wires. The cross
wires are fallen automatically, finished mesh is pulled by step
motor. The line wires are fed manually, the cross wires falling
automatically by step motor, when the wire diameter is 4-8mm, both
the welding electrodes and transformer are equipped with water
cooling system to prolong the service life.
2. Technical parameter
| Model | HY-DHW-1500 | HY-DHW-2000 | HY-DHW-2500 | HY-DHW-2800 | HY-DHW-3300 |
| Weld width(mm) | 1500 | 2000 | 2500 | 2800 | 3300 |
| Meshi trip(mm) | Single trip 3000 and no limit on return | ||||
| Std trans.spacing | >=25mm-stepless adjustable | ||||
| Std long.spacing | >=50mm, and progressive increase by 50 | >=100mm, and increase by 100 | |||
| Std weld spots | 31 | 41 | 51 | 27 | 32 |
| Wire diameter(mm) | 3.0-6.0 | 3.0-6.0 | 3.0-6.0 | 5.0-12.0 | 5.0-12.0 |
| Weld speed(times/min | 50-70 | 40-60 | 40-60 | 40-60 | 40-60 |
| Trans material | Straight bar/rod | Straight bar | |||
| Long material | Straight bar/rod | ||||
| Control mode | PLC programming servo motor stepper | ||||
| Mesh diagonal error | <=2 | ||||
| Mesh overall error | <=2 | ||||
| Air pressure | >=0.7 | ||||
| Weld material | Cold drawn wire, galvanized wire, cold rolled ribbed steel | ||||
3. Application area
The automatic PLC touch screen CNC spot welding machine can be
widely used in mining, petroleum, chemistry, food, medicine,
machine manufacturing industry. It is used for machine protection
for the above industries.
4. Advantages
a. Small Operation Cabinets, It use to control different parts
of machine. Near connect, clear and convenient worker operation.
b. The weft wire of wire mesh welding machine feeding from the
multi hopper which capacity is more over ten times than the
traditional hopper.
c. PLC control system: DELTA made in Taiwan.
d. Welding part can easily switch, which greatly improves the
service life of machinery, maximum reduce the cost.
e. The machine line automatic degree can be according to
request. For the economical type, line wire and cross wire are pre
strainghtened and cut to length. We are capable to produce fully
automatic machine.
