Xiamen BMS Group |
|
Hydraulic Corrugated Roof Sheet Making Machine 24 Stations
Corrugated Roof Sheet Making Machine is perfectly combined two different-model machines together, this can save the space and also is easy to operate. The two models are chose according to customers" need.
Material
Material Thickness:0.42mm,
Material: G550S Hi-Tensile Colorbond Steel
Corrugated Roof Sheet Making Machine Components
1)3T×600mm Automatic Hydraulic Decoiler: one set
Hydraulic system to expand coil inner hole;Pump motor:3.0KW
Coil inner–diameter: 508+/-30mm; Coil outer-diameter: Max.1200mm
Load capacity: Max.3Tons, coil width: Max.600mm
2) Main machine:
With feeding material guide, body frame made from H450 type steel by welding;
Rollers manufactured from GCr15, HRC57-60°, fine polished, heat treatment, hard Chrome Coated
Shafts Diameter=ф60mm, precision machined
Gear/Sprocket driving, about 24-step to form
Main Motor=15KW,
Frequency speed control
Forming speed of approx.18m/min
With hardened steel bearings for high tensile steel material
With safety guarding cover on a machine equipped with stroke switch
3) Hydraulic Cutting device: one set
Post cut, stop to cutting, blanking to cut
Pump motor: 2.2KW Cutting pressure: Max.8Mpa
Cutting tool material: Cr12Mov, Surface Heat treatment, with Protective cover for cutter
4)PLC control system: one set
Control the quantity and cutting length automatically
input the production data(production batch, pcs, length,etc.)on the touch screen, it can finish the production automatically.
PLC control system brand: DELTA(Taiwan brand)/Schneider(French brand)/Siemens(German brand)
Inverter: DELTA(Taiwan brand)/PANASONIC(Japan brand)
Item | Tolerance |
Cut-to-length tolerance | ≤±2 mm |
Profile tolerance | ≤±2 mm |
5)Run out table-unpower