Auto Flashing Machine, Metal Roll Forming Machine With Digital Control Folder And Slitter

Auto Flashing Machine, Metal Roll Forming Machine With Digital Control Folder And Slitter

The auto flashing machine is flexibly used to fold and slit work piece which is unsuitable for traditional pressing system. The machine mainly consists of machine body, clamp unit, folding equipment, digital-control backstop, slitting system, work piece supporting equipment, hydraulic system and PC control system,ect.  

• Main Technical Parameters

1. Max. Folding length           8000mm

2. Throat depth:                     800mm

3. Max. folding thickness        1.50mm steel @ 250mpa

                                               2.00mm soft aluminum

                                              1.00mm stainless steel

4. Max. slitting thickness:         1.50mm steel @ 250mpa

                                                 2.00mm soft aluminum

                                                 1.00mm stainless steel

5. Max. folding angle:            125 degrees

6. Weight                             5.400kg

7. Slitting speed                 about 800mm/second

8. Slitting mold                     rotary slitter

9. Control system                   PC with 12’’ LCD

10．Electric condition             380V/3Phase/ 50HZ

• Standard Equipment of Machine

Machine body                            1pc

Clamp unit                               1set

Folding equipment                       1set

Digital-control backstop                1set

Slitting system                        1set

Work piece supporting equipment         1set

Hydraulic system                      1set

PLC Control system                        1pc